On Thu, Oct 07, 2021 at 11:41:39PM +0200, Andrew Lunn wrote:
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + //Ethernet switch connected via spi to the host
> > + ethernet {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + fixed-link {
> > + speed = <1000>;
> > + full-duplex;
> > + };
> > + };
> > +
> > + spi {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + lan9374: switch@0 {
> > + compatible = "microchip,lan9374";
> > + reg = <0>;
> > +
> > + spi-max-frequency = <44000000>;
> > +
> > + ethernet-ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + port@0 {
> > + reg = <0>;
> > + label = "lan1";
> > + phy-mode = "internal";
> > + phy-handle = <&t1phy0>;
> > + };
>
> ...
>
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + t1phy0: ethernet-phy@0{
> > + reg = <0x0>;
> > + };
>
> Does this pass Rob's DT schema proof tools? You don't have any
> description of the mdio properties.
Good catch. It will pass ATM only because 'unevaluatedProperties' is not
yet implemented (should be in place soon). So it needs:
mdio:
$ref: /schemas/net/mdio.yaml#
unevaluatedProperties: false
Otherwise, this looks fine.
Rob
