On Sun, 17 Oct 2021 15:06:36 +0200, Stefan Wahren wrote: > This converts the VCHIQ bindings to YAML format. > > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> > --- > .../bindings/soc/bcm/brcm,bcm2835-vchiq.txt | 17 -------- > .../bindings/soc/bcm/brcm,bcm2835-vchiq.yaml | 47 ++++++++++++++++++++++ > 2 files changed, 47 insertions(+), 17 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt > create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1542230 mailbox@7e00b840: compatible: Additional items are not allowed ('brcm,bcm2835-vchiq' was unexpected) arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dt.yaml arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dt.yaml arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dt.yaml arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dt.yaml arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dt.yaml mailbox@7e00b840: compatible: ['brcm,bcm2836-vchiq', 'brcm,bcm2835-vchiq'] is too long arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dt.yaml arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dt.yaml arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dt.yaml arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dt.yaml arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dt.yaml
