To support HS200 and UHS-1, we need add a big hunk of code, as shown in the following patches. So a separate file for rockchip SOCs is suitable. Signed-off-by: Addy Ke <addy.ke@xxxxxxxxxxxxxx> --- drivers/mmc/host/Kconfig | 9 +++ drivers/mmc/host/Makefile | 1 + drivers/mmc/host/dw_mmc-pltfm.c | 57 --------------- drivers/mmc/host/dw_mmc-rockchip.c | 146 +++++++++++++++++++++++++++++++++++++ 4 files changed, 156 insertions(+), 57 deletions(-) create mode 100644 drivers/mmc/host/dw_mmc-rockchip.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index a565254..ae61df6 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -621,6 +621,15 @@ config MMC_DW_PCI If unsure, say N. +config MMC_DW_ROCKCHIP + tristate "Rockchip specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for Rockchip SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on RK3066, RK3188 and RK3288 SoC's. + config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" depends on MMC_BLOCK diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 7f81ddf..5fce465 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o +obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o obj-$(CONFIG_MMC_VUB300) += vub300.o diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index b547f7a..0c56c41 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -26,64 +26,11 @@ #include "dw_mmc.h" #include "dw_mmc-pltfm.h" -#define RK3288_CLKGEN_DIV 2 - static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr) { *cmdr |= SDMMC_CMD_USE_HOLD_REG; } -static int dw_mci_rk3288_setup_clock(struct dw_mci *host) -{ - host->bus_hz /= RK3288_CLKGEN_DIV; - - return 0; -} - -static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios) -{ - int ret; - unsigned int cclkin; - u32 bus_hz; - - /* - * cclkin: source clock of mmc controller. - * bus_hz: card interface clock generated by CLKGEN. - * bus_hz = cclkin / RK3288_CLKGEN_DIV; - * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div)) - * - * Note: div can only be 0 or 1 - * if DDR50 8bit mode(only emmc work in 8bit mode), - * div must be set 1 - */ - if ((ios->bus_width == MMC_BUS_WIDTH_8) && - (ios->timing == MMC_TIMING_MMC_DDR52)) - cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV; - else - cclkin = ios->clock * RK3288_CLKGEN_DIV; - - ret = clk_set_rate(host->ciu_clk, cclkin); - if (ret) - dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock); - - bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV; - if (bus_hz != host->bus_hz) { - host->bus_hz = bus_hz; - /* force dw_mci_setup_bus() */ - host->current_speed = 0; - } -} - -static const struct dw_mci_drv_data rk2928_drv_data = { - .prepare_command = dw_mci_pltfm_prepare_command, -}; - -static const struct dw_mci_drv_data rk3288_drv_data = { - .prepare_command = dw_mci_pltfm_prepare_command, - .set_ios = dw_mci_rk3288_set_ios, - .setup_clock = dw_mci_rk3288_setup_clock, -}; - static const struct dw_mci_drv_data socfpga_drv_data = { .prepare_command = dw_mci_pltfm_prepare_command, }; @@ -144,10 +91,6 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops); static const struct of_device_id dw_mci_pltfm_match[] = { { .compatible = "snps,dw-mshc", }, - { .compatible = "rockchip,rk2928-dw-mshc", - .data = &rk2928_drv_data }, - { .compatible = "rockchip,rk3288-dw-mshc", - .data = &rk3288_drv_data }, { .compatible = "altr,socfpga-dw-mshc", .data = &socfpga_drv_data }, {}, diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c new file mode 100644 index 0000000..3d86ef3 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-rockchip.c @@ -0,0 +1,146 @@ +/* + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd + * Author: addy ke <addy.ke@xxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/mmc/dw_mmc.h> +#include <linux/of_address.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define RK3288_CLKGEN_DIV 2 + +static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr) +{ + *cmdr |= SDMMC_CMD_USE_HOLD_REG; +} + +static int dw_mci_rk3288_setup_clock(struct dw_mci *host) +{ + host->bus_hz /= RK3288_CLKGEN_DIV; + + return 0; +} + +static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + int ret; + unsigned int cclkin; + u32 bus_hz; + + /* + * cclkin: source clock of mmc controller + * bus_hz: card interface clock generated by CLKGEN + * bus_hz = cclkin / RK3288_CLKGEN_DIV + * os->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div)) + * + * Note: div can only be 0 or 1 + * if DDR50 8bit mode(only emmc work in 8bit mode), + * div must be set 1 + */ + if (ios->bus_width == MMC_BUS_WIDTH_8 && + ios->timing == MMC_TIMING_MMC_DDR52) + cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV; + else + cclkin = ios->clock * RK3288_CLKGEN_DIV; + + ret = clk_set_rate(host->ciu_clk, cclkin); + if (ret) + dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock); + + bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV; + if (bus_hz != host->bus_hz) { + host->bus_hz = bus_hz; + /* force dw_mci_setup_bus() */ + host->current_speed = 0; + } +} + +static const struct dw_mci_drv_data rk2928_drv_data = { + .prepare_command = dw_mci_rockchip_prepare_command, +}; + +static const struct dw_mci_drv_data rk3288_drv_data = { + .prepare_command = dw_mci_rockchip_prepare_command, + .set_ios = dw_mci_rk3288_set_ios, + .setup_clock = dw_mci_rk3288_setup_clock, +}; + +static const struct of_device_id dw_mci_rockchip_match[] = { + { .compatible = "rockchip,rk2928-dw-mshc", + .data = &rk2928_drv_data }, + { .compatible = "rockchip,rk3288-dw-mshc", + .data = &rk3288_drv_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match); + +static int dw_mci_rockchip_probe(struct platform_device *pdev) +{ + const struct dw_mci_drv_data *drv_data; + const struct of_device_id *match; + + match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node); + drv_data = match->data; + + return dw_mci_pltfm_register(pdev, drv_data); +} + +#ifdef CONFIG_PM_SLEEP +static int dw_mci_rockchip_suspend(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + int ret; + + ret = dw_mci_suspend(host); + if (!ret) + clk_disable_unprepare(host->ciu_clk); + + return ret; +} + +static int dw_mci_rockchip_resume(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(host->ciu_clk); + if (ret) { + dev_err(host->dev, "failed to enable ciu clock\n"); + return ret; + } + + return dw_mci_resume(host); +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops, + dw_mci_rockchip_suspend, + dw_mci_rockchip_resume); + +static struct platform_driver dw_mci_rockchip_pltfm_driver = { + .probe = dw_mci_rockchip_probe, + .remove = dw_mci_pltfm_remove, + .driver = { + .name = "dwmmc_rockchip", + .of_match_table = dw_mci_rockchip_match, + .pm = &dw_mci_rockchip_pmops, + }, +}; + +module_platform_driver(dw_mci_rockchip_pltfm_driver); + +MODULE_AUTHOR("Addy Ke <addy.ke@xxxxxxxxxxxxxx>"); +MODULE_DESCRIPTION("Rockchip Specific DW-MSHC Driver Extension"); +MODULE_ALIAS("platform:dwmmc-rockchip"); +MODULE_LICENSE("GPL v2"); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html