Hi Bjorn, Could you please take a look at this patch series? On Fri, Oct 8, 2021 at 4:15 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote: > > Hi, > > On Fri, Oct 8, 2021 at 11:39 AM Philip Chen <philipchen@xxxxxxxxxxxx> wrote: > > > > Add a dts fragment file to support the sc7180 boards with the second > > source edp bridge, Parade ps8640. > > > > Signed-off-by: Philip Chen <philipchen@xxxxxxxxxxxx> > > --- > > > > Changes in v3: > > - Set gpio32 active high > > - Rename edp-bridge to bridge to align with ti-sn65 dts > > - Remove the unused label 'aux_bus' > > > > Changes in v2: > > - Add the definition of edp_brij_i2c and some other properties to > > ps8640 dts, making it match ti-sn65dsi86 dts better > > > > .../qcom/sc7180-trogdor-parade-ps8640.dtsi | 109 ++++++++++++++++++ > > 1 file changed, 109 insertions(+) > > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > > I think these two are good to go as long as Bjorn doesn't mind having > this dtsi file in the tree with no users yet. It looks nearly certain > that some trogdor devices will ship with it. > > -Doug
