On 14.10.2021 10:32, Yassine Oudjana wrote:
> Add a new DTSI for MSM8996 Pro (MSM8996SG) with msm-id and CPU/GPU OPPs.
> CBF OPPs and CPR parameters will be added to it as well once support for
> CBF scaling and CPR is introduced.
>
> Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 82 +++----
> arch/arm64/boot/dts/qcom/msm8996pro.dtsi | 281 +++++++++++++++++++++++
> 2 files changed, 322 insertions(+), 41 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8996pro.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 94a846c3f1ee..5b2600a4fb2a 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -142,82 +142,82 @@ cluster0_opp: opp_table0 {
> /* Nominal fmax for now */
> opp-307200000 {
> opp-hz = /bits/ 64 <307200000>;
> - opp-supported-hw = <0x77>;
> + opp-supported-hw = <0x7>;
You didn't describe what's the reason for changing this everywhere.
If it's been always broken, perhaps make it a separate commit describing
the issue.
Konrad
