Add spmi support for MT6873/8192.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@xxxxxxxxxxxx>
---
changes since v11:
- No change.
---
drivers/spmi/Kconfig | 10 +
drivers/spmi/Makefile | 2 +
drivers/spmi/spmi-mtk-pmif.c | 459 +++++++++++++++++++++++++++++++++++
3 files changed, 471 insertions(+)
create mode 100644 drivers/spmi/spmi-mtk-pmif.c
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index 2874b6c26028..ea5703f6e544 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -34,4 +34,14 @@ config SPMI_MSM_PMIC_ARB
This is required for communicating with Qualcomm PMICs and
other devices that have the SPMI interface.
+config SPMI_MTK_PMIF
+ tristate "Mediatek SPMI Controller (PMIC Arbiter)"
This driver should be useless without a MediaTek SoC, for which reason, I would
add here a nice
depends on ARCH_MEDIATEK || COMPILE_TEST
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Mediatek family
+ processors.
+
+ This is required for communicating with Mediatek PMICs and
+ other devices that have the SPMI interface.
+
endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 6e092e6f290c..0b21aaffcbb9 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_SPMI) += spmi.o
obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
+obj-$(CONFIG_SPMI_MTK_PMIF) += spmi-mtk-pmif.o
+
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
new file mode 100644
index 000000000000..35d338a19d76
--- /dev/null
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2021 MediaTek Inc.
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/spmi.h>
+
+#define SWINF_IDLE 0x00
+#define SWINF_WFVLDCLR 0x06
+
+#define GET_SWINF(x) (((x) >> 1) & 0x7)
+
+#define PMIF_CMD_REG_0 0
+#define PMIF_CMD_REG 1
+#define PMIF_CMD_EXT_REG 2
+#define PMIF_CMD_EXT_REG_LONG 3
+
+#define PMIF_DELAY_US 10
+#define PMIF_TIMEOUT_US (10 * 1000)
+
+#define PMIF_CHAN_OFFSET 0x5
+
+#define PMIF_MAX_CLKS 3
+
+#define SPMI_OP_ST_BUSY 1
+
+struct ch_reg {
+ u32 ch_sta;
+ u32 wdata;
+ u32 rdata;
+ u32 ch_send;
+ u32 ch_rdy;
+};
+
+struct pmif_data {
+ const u32 *regs;
+ const u32 *spmimst_regs;
+ u32 soc_chan;
+};
+
+struct pmif {
+ void __iomem *base;
+ void __iomem *spmimst_base;
+ struct ch_reg chan;
+ struct clk_bulk_data clks[PMIF_MAX_CLKS];
+ size_t nclks;
+ const struct pmif_data *data;
+};
+
+static const char * const pmif_clock_names[] = {
+ "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux",
+};
+
+enum pmif_regs {
+ PMIF_INIT_DONE,
+ PMIF_INF_EN,
+ PMIF_ARB_EN,
+ PMIF_CMDISSUE_EN,
+ PMIF_TIMER_CTRL,
+ PMIF_SPI_MODE_CTRL,
+ PMIF_IRQ_EVENT_EN_0,
+ PMIF_IRQ_FLAG_0,
+ PMIF_IRQ_CLR_0,
+ PMIF_IRQ_EVENT_EN_1,
+ PMIF_IRQ_FLAG_1,
+ PMIF_IRQ_CLR_1,
+ PMIF_IRQ_EVENT_EN_2,
+ PMIF_IRQ_FLAG_2,
+ PMIF_IRQ_CLR_2,
+ PMIF_IRQ_EVENT_EN_3,
+ PMIF_IRQ_FLAG_3,
+ PMIF_IRQ_CLR_3,
+ PMIF_IRQ_EVENT_EN_4,
+ PMIF_IRQ_FLAG_4,
+ PMIF_IRQ_CLR_4,
+ PMIF_WDT_EVENT_EN_0,
+ PMIF_WDT_FLAG_0,
+ PMIF_WDT_EVENT_EN_1,
+ PMIF_WDT_FLAG_1,
+ PMIF_SWINF_0_STA,
+ PMIF_SWINF_0_WDATA_31_0,
+ PMIF_SWINF_0_RDATA_31_0,
+ PMIF_SWINF_0_ACC,
+ PMIF_SWINF_0_VLD_CLR,
+ PMIF_SWINF_1_STA,
+ PMIF_SWINF_1_WDATA_31_0,
+ PMIF_SWINF_1_RDATA_31_0,
+ PMIF_SWINF_1_ACC,
+ PMIF_SWINF_1_VLD_CLR,
+ PMIF_SWINF_2_STA,
+ PMIF_SWINF_2_WDATA_31_0,
+ PMIF_SWINF_2_RDATA_31_0,
+ PMIF_SWINF_2_ACC,
+ PMIF_SWINF_2_VLD_CLR,
+ PMIF_SWINF_3_STA,
+ PMIF_SWINF_3_WDATA_31_0,
+ PMIF_SWINF_3_RDATA_31_0,
+ PMIF_SWINF_3_ACC,
+ PMIF_SWINF_3_VLD_CLR,
+};
+
+static const u32 mt6873_regs[] = {
+ [PMIF_INIT_DONE] = 0x0000,
+ [PMIF_INF_EN] = 0x0024,
+ [PMIF_ARB_EN] = 0x0150,
+ [PMIF_CMDISSUE_EN] = 0x03B4,
+ [PMIF_TIMER_CTRL] = 0x03E0,
+ [PMIF_SPI_MODE_CTRL] = 0x0400,
+ [PMIF_IRQ_EVENT_EN_0] = 0x0418,
+ [PMIF_IRQ_FLAG_0] = 0x0420,
+ [PMIF_IRQ_CLR_0] = 0x0424,
+ [PMIF_IRQ_EVENT_EN_1] = 0x0428,
+ [PMIF_IRQ_FLAG_1] = 0x0430,
+ [PMIF_IRQ_CLR_1] = 0x0434,
+ [PMIF_IRQ_EVENT_EN_2] = 0x0438,
+ [PMIF_IRQ_FLAG_2] = 0x0440,
+ [PMIF_IRQ_CLR_2] = 0x0444,
+ [PMIF_IRQ_EVENT_EN_3] = 0x0448,
+ [PMIF_IRQ_FLAG_3] = 0x0450,
+ [PMIF_IRQ_CLR_3] = 0x0454,
+ [PMIF_IRQ_EVENT_EN_4] = 0x0458,
+ [PMIF_IRQ_FLAG_4] = 0x0460,
+ [PMIF_IRQ_CLR_4] = 0x0464,
+ [PMIF_WDT_EVENT_EN_0] = 0x046C,
+ [PMIF_WDT_FLAG_0] = 0x0470,
+ [PMIF_WDT_EVENT_EN_1] = 0x0474,
+ [PMIF_WDT_FLAG_1] = 0x0478,
+ [PMIF_SWINF_0_ACC] = 0x0C00,
+ [PMIF_SWINF_0_WDATA_31_0] = 0x0C04,
+ [PMIF_SWINF_0_RDATA_31_0] = 0x0C14,
+ [PMIF_SWINF_0_VLD_CLR] = 0x0C24,
+ [PMIF_SWINF_0_STA] = 0x0C28,
+ [PMIF_SWINF_1_ACC] = 0x0C40,
+ [PMIF_SWINF_1_WDATA_31_0] = 0x0C44,
+ [PMIF_SWINF_1_RDATA_31_0] = 0x0C54,
+ [PMIF_SWINF_1_VLD_CLR] = 0x0C64,
+ [PMIF_SWINF_1_STA] = 0x0C68,
+ [PMIF_SWINF_2_ACC] = 0x0C80,
+ [PMIF_SWINF_2_WDATA_31_0] = 0x0C84,
+ [PMIF_SWINF_2_RDATA_31_0] = 0x0C94,
+ [PMIF_SWINF_2_VLD_CLR] = 0x0CA4,
+ [PMIF_SWINF_2_STA] = 0x0CA8,
+ [PMIF_SWINF_3_ACC] = 0x0CC0,
+ [PMIF_SWINF_3_WDATA_31_0] = 0x0CC4,
+ [PMIF_SWINF_3_RDATA_31_0] = 0x0CD4,
+ [PMIF_SWINF_3_VLD_CLR] = 0x0CE4,
+ [PMIF_SWINF_3_STA] = 0x0CE8,
+};
Hello!
Can you please either use simply a space, or fix your tabulations indentation?
+
+enum spmi_regs {
+ SPMI_OP_ST_CTRL,
+ SPMI_GRP_ID_EN,
+ SPMI_OP_ST_STA,
+ SPMI_MST_SAMPL,
+ SPMI_MST_REQ_EN,
+ SPMI_REC_CTRL,
+ SPMI_REC0,
+ SPMI_REC1,
+ SPMI_REC2,
+ SPMI_REC3,
+ SPMI_REC4,
+ SPMI_MST_DBG,
+};
+
+static const u32 mt6873_spmi_regs[] = {
+ [SPMI_OP_ST_CTRL] = 0x0000,
+ [SPMI_GRP_ID_EN] = 0x0004,
+ [SPMI_OP_ST_STA] = 0x0008,
+ [SPMI_MST_SAMPL] = 0x000c,
+ [SPMI_MST_REQ_EN] = 0x0010,
+ [SPMI_REC_CTRL] = 0x0040,
+ [SPMI_REC0] = 0x0044,
+ [SPMI_REC1] = 0x0048,
+ [SPMI_REC2] = 0x004c,
+ [SPMI_REC3] = 0x0050,
+ [SPMI_REC4] = 0x0054,
+ [SPMI_MST_DBG] = 0x00fc,
+};
+
+static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
+{
+ return readl(arb->base + arb->data->regs[reg]);
+}
+
+static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
+{
+ writel(val, arb->base + arb->data->regs[reg]);
+}
+
+static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
+{
+ writel(val, arb->spmimst_base + arb->data->spmimst_regs[reg]);
+}
+
+static bool pmif_is_fsm_vldclr(struct pmif *arb)
+{
+ u32 reg_rdata;
+
+ reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
+
+ return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
+}
+
+static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ u32 rdata, cmd;
+ int ret;
+
+ /* Check the opcode */
+ if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+ return -EINVAL;
+
+ cmd = opc - SPMI_CMD_RESET;
+
+ mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
+ ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA],
+ rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0)
+ dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
+
+ return ret;
+}
+
+static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, u8 *buf, size_t len)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ struct ch_reg *inf_reg;
+ int ret;
+ u32 data, cmd;
+
+ /* Check for argument validation. */
+ if (sid & ~0xf) {
+ dev_err(&ctrl->dev, "exceed the max slv id\n");
+ return -EINVAL;
+ }
+
+ if (len > 4) {
+ dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
+
+ return -EINVAL;
+ }
+
+ if (opc >= 0x60 && opc <= 0x7f)
+ opc = PMIF_CMD_REG;
+ else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))
+ opc = PMIF_CMD_EXT_REG_LONG;
+ else
+ return -EINVAL;
+
+ /* Wait for Software Interface FSM state to be IDLE. */
+ inf_reg = &arb->chan;
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_IDLE,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ /* set channel ready if the data has transferred */
+ if (pmif_is_fsm_vldclr(arb))
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+ dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+ goto out;
You can just return ret here, instead of jumping to the out label.
+ }
+
+ /* Send the command. */
+ cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr;
+ pmif_writel(arb, cmd, inf_reg->ch_send);
+
+ /*
+ * Wait for Software Interface FSM state to be WFVLDCLR,
+ * read the data and clear the valid flag.
+ */
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_WFVLDCLR,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
+ goto out;
Same here
+ }
+
+ data = pmif_readl(arb, inf_reg->rdata);
+ memcpy(buf, &data, len);
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+
+out:
+ if (ret < 0)
+ return ret;
...and after the fixes, you won't need this label, nor this check here anymore.
+
+ return 0;
+}
+
+static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, const u8 *buf, size_t len)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ struct ch_reg *inf_reg;
+ int ret;
+ u32 data, cmd;
+
+ if (len > 4) {
+ dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
+
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x40 && opc <= 0x5F)
+ opc = PMIF_CMD_REG;
+ else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37))
+ opc = PMIF_CMD_EXT_REG_LONG;
+ else if (opc >= 0x80)
+ opc = PMIF_CMD_REG_0;
+ else
+ return -EINVAL;
+
+ /* Wait for Software Interface FSM state to be IDLE. */
+ inf_reg = &arb->chan;
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_IDLE,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ /* set channel ready if the data has transferred */
+ if (pmif_is_fsm_vldclr(arb))
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+ dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+ goto out;
Just return ret here.
+ }
+
+ /* Set the write data. */
+ memcpy(&data, buf, len);
+ pmif_writel(arb, data, inf_reg->wdata);
+
+ /* Send the command. */
+ cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr;
+ pmif_writel(arb, cmd, inf_reg->ch_send);
+
+out:
...and this label can then also disappear.
After these fixes,
Acked-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
