[PATCH v3] dt-bindings: input: Convert Silead GSL1680 binding to a schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Silead GSL1680 Touchscreen Controller is supported by Linux thanks
to its device tree binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.

Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: linux-input@xxxxxxxxxxxxxxx
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>

---

Changes from v2:
  - Fixed firmware-name property name

Changes from v1:
  - Added maximum to the number of fingers
---
 .../input/touchscreen/silead,gsl1680.yaml     | 91 +++++++++++++++++++
 .../input/touchscreen/silead_gsl1680.txt      | 44 ---------
 2 files changed, 91 insertions(+), 44 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
new file mode 100644
index 000000000000..eec6f7f6f0a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silead GSL1680 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - silead,gsl1680
+      - silead,gsl1688
+      - silead,gsl3670
+      - silead,gsl3675
+      - silead,gsl3692
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: >
+      File basename for board specific firmware
+
+  silead,max-fingers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 5
+    description: >
+      Maximum number of fingers the touchscreen can detect
+
+  silead,home-button:
+    type: boolean
+    description: >
+      Does the device have a capacitive home-button build into the
+      touchscreen?
+
+  avdd-supply:
+    description: >
+      Regulator phandle for controller AVDD
+
+  vddio-supply:
+    description: >
+      Regulator phandle for controller VDDIO
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "silead,gsl1680";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-size-x = <480>;
+            touchscreen-size-y = <800>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+            silead,max-fingers = <5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
deleted file mode 100644
index d67e558e5ab5..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* GSL 1680 touchscreen controller
-
-Required properties:
-- compatible		  : Must be one of the following, depending on the model:
-			    "silead,gsl1680"
-			    "silead,gsl1688"
-			    "silead,gsl3670"
-			    "silead,gsl3675"
-			    "silead,gsl3692"
-- reg			  : I2C slave address of the chip (0x40)
-- interrupts		  : interrupt specification for the gsl1680 interrupt
-- power-gpios		  : Specification for the pin connected to the gsl1680's
-			    shutdown input. This needs to be driven high to take the
-			    gsl1680 out of its low power state
-- touchscreen-size-x	  : See touchscreen.txt
-- touchscreen-size-y	  : See touchscreen.txt
-
-Optional properties:
-- firmware-name		  : File basename (string) for board specific firmware
-- touchscreen-inverted-x  : See touchscreen.txt
-- touchscreen-inverted-y  : See touchscreen.txt
-- touchscreen-swapped-x-y : See touchscreen.txt
-- silead,max-fingers	  : maximum number of fingers the touchscreen can detect
-- silead,home-button	  : Boolean, set to true on devices which have a
-			    capacitive home-button build into the touchscreen
-- vddio-supply		  : regulator phandle for controller VDDIO
-- avdd-supply		  : regulator phandle for controller AVDD
-
-Example:
-
-i2c@00000000 {
-	gsl1680: touchscreen@40 {
-		compatible = "silead,gsl1680";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
-		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-		silead,max-fingers = <5>;
-	};
-};
-- 
2.31.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux