'iface_clk' clock is not used by the
qcom, bam_dma driver, so remove the same from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk']
is too long
Fix the same.
Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6a05ee82547f..55c961b5f1ab 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -346,9 +346,8 @@ qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0 0x07984000 0x0 0x1a000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QPIC_CLK>,
- <&gcc GCC_QPIC_AHB_CLK>;
- clock-names = "iface_clk", "bam_clk";
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
--
2.31.1
