[PATCH v3 06/17] ARM: dts: ls1021a: update pcie nodes for dt-schema check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Break up long values to pass dt-schema checks.

Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
---
 arch/arm/boot/dts/ls1021a.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2f9ea0beac7a..fa4adfdf4abd 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -839,8 +839,8 @@ usb3: usb@3100000 {
 
 		pcie@3400000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 			fsl,pcie-scfg = <&scfg 0>;
@@ -849,8 +849,8 @@ pcie@3400000 {
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -863,8 +863,8 @@ pcie@3400000 {
 
 		pcie@3500000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,pcie-scfg = <&scfg 1>;
@@ -873,8 +873,8 @@ pcie@3500000 {
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux