refer to the discussion [1] when try to enable i.MX8MM PCIe support, one standalone PCIe PHY driver should be seperated from i.MX PCIe driver when enable i.MX8MM PCIe support. This patch-set adds the standalone PCIe PHY driver suport[1-5], and i.MX8MM PCIe support[6-9] to have whole view to review this patch-set. The PCIe works on i.MX8MM EVK board based the the blkctrl power driver [2] and this PHY driver patch-set. [1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@xxxxxxxxxxxxxx/ [2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@xxxxxxxxxxxxxx/ Main changes v2 --> v3: - Regarding Lucas' comments. - to have a whole view to review the patches, send out the i.MX8MM PCIe support too. - move the PHY related bits manipulations of the GPR/SRC to standalone PHY driver. - split the dts changes to SOC and board DT, and use the enum instead of raw value. - update the license of the dt-binding header file. Changes v1 --> v2: - Update the license of the dt-binding header file to make the license compatible with dts files. - Fix the dt_binding_check errors. Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 +++ Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml | 79 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 53 ++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 46 ++++++++++++++++- drivers/pci/controller/dwc/pci-imx6.c | 63 ++++++++++++++++++++++- drivers/phy/freescale/Kconfig | 9 ++++ drivers/phy/freescale/Makefile | 1 + drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 218 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/dt-bindings/phy/phy-imx8-pcie.h | 14 ++++++ 9 files changed, 486 insertions(+), 3 deletions(-) [PATCH v3 1/9] dt-bindings: phy: phy-imx8-pcie: Add binding for the [PATCH v3 2/9] dt-bindings: phy: add imx8 pcie phy driver support [PATCH v3 3/9] arm64: dts: imx8mm: add the pcie phy support [PATCH v3 4/9] arm64: dts: imx8mm-evk: add the pcie phy support [PATCH v3 5/9] phy: freescale: pcie: initialize the imx8 pcie [PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and name [PATCH v3 7/9] arm64: dts: imx8mm: add the pcie support [PATCH v3 8/9] arm64: dts: imx8mm-evk: add the pcie support on imx8mm [PATCH v3 9/9] PCI: imx: add the imx8mm pcie support
