On Sun, Oct 10, 2021 at 03:07:28PM +0300, Vladimir Oltean wrote: > On Sun, Oct 10, 2021 at 01:15:46PM +0200, Ansuel Smith wrote: > > Add names and descriptions of additional PORT0_PAD_CTRL properties. > > qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock > > phase to failling edge. > > > > Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx> > > Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> > > --- > > Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > > index 8c73f67c43ca..cc214e655442 100644 > > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt > > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt > > @@ -37,6 +37,10 @@ A CPU port node has the following optional node: > > managed entity. See > > Documentation/devicetree/bindings/net/fixed-link.txt > > for details. > > +- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. > > + Mostly used in qca8327 with CPU port 0 set to > > + sgmii. > > +- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. > > > > For QCA8K the 'fixed-link' sub-node supports only the following properties: > > > > -- > > 2.32.0 > > > > Must first document, then use. > Also, would you care converting qca8k.txt to qca8k.yaml? Ow ok, will swap alle the patch. About converting... Hard task will try but it will be a nightmare. Sad me. -- Ansuel
