This change documents the device tree bindings for the Nuvoton NCT7802Y driver. Signed-off-by: Oskar Senft <osk@xxxxxxxxxx> --- Changes from PATCH v5: - Refactored to use patternProperties. - Added validation for sensor-type and temperature-mode. --- .../bindings/hwmon/nuvoton,nct7802.yaml | 144 ++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml new file mode 100644 index 000000000000..73fffd661f0a --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NCT7802Y Hardware Monitoring IC + +maintainers: + - Guenter Roeck <linux@xxxxxxxxxxxx> + +description: | + The NCT7802Y is a hardware monitor IC which supports one on-die and up to + 5 remote temperature sensors with SMBus interface. + + Datasheets: + https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf + +properties: + compatible: + enum: + - nuvoton,nct7802 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-3]$": + type: object + properties: + reg: + items: + - enum: + - 0 # Local Temperature Sensor ("LTD") + - 1 # Remote Temperature Sensor or Voltage Sensor 1 ("RTD1") + - 2 # Remote Temperature Sensor or Voltage Sensor 2 ("RTD2") + - 3 # Remote Temperature Sensor or Voltage Sensor 3 ("RTD3") + sensor-type: + items: + - enum: + - temperature + - voltage + temperature-mode: + items: + - enum: + - thermistor + - thermal-diode + required: + - reg + allOf: + # For channels RTD1, RTD2 and RTD3, require sensor-type to be set. + # Otherwise (for all other channels), do not allow temperature-mode to be + # set. + - if: + properties: + reg: + items: + - enum: + - 1 + - 2 + - 3 + then: + required: + - sensor-type + else: + not: + required: + - sensor-type + + # For channels RTD1 and RTD2 and if sensor-type is "temperature", require + # temperature-mode to be set. Otherwise (for all other channels or + # sensor-type settings), do not allow temperature-mode to be set + - if: + properties: + reg: + items: + - enum: + - 1 + - 2 + sensor-type: + items: + - enum: + - temperature + then: + required: + - temperature-mode + else: + not: + required: + - temperature-mode + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nct7802@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* LTD */ + reg = <0>; + status = "okay"; + }; + + channel@1 { /* RTD1 */ + reg = <1>; + status = "okay"; + sensor-type = "voltage"; + }; + + channel@2 { /* RTD2 */ + reg = <2>; + status = "okay"; + sensor-type = "temperature"; + temperature-mode = "thermal-diode"; + }; + + channel@3 { /* RTD3 */ + reg = <3>; + status = "okay"; + sensor-type = "temperature"; + }; + }; + }; -- 2.33.0.882.g93a45727a2-goog
