Re: [PATCH v12 05/10] thermal: sy7636a: Add thermal driver for sy7636a

[Guenter Roeck <linux@xxxxxxxxxxxx>]

On Sat, Oct 09, 2021 at 09:50:27PM +1000, Alistair Francis wrote:
> Add thermal driver to enable kernel based polling
> and shutdown of device for temperatures out of spec
> 

It _should_ be possible to implement this as part of the hwmon driver
(by using the _with_info hwmon API).

Guenter

> Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx>
> ---
>  drivers/thermal/Kconfig           |  6 ++
>  drivers/thermal/Makefile          |  1 +
>  drivers/thermal/sy7636a_thermal.c | 94 +++++++++++++++++++++++++++++++
>  3 files changed, 101 insertions(+)
>  create mode 100644 drivers/thermal/sy7636a_thermal.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index d7f44deab5b1..6ee0e7de1b37 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -450,6 +450,12 @@ depends on (ARCH_STI || ARCH_STM32) && OF
>  source "drivers/thermal/st/Kconfig"
>  endmenu
>  
> +config SY7636A_THERMAL
> +	tristate "SY7636A thermal management"
> +	help
> +	  Enable the sy7636a thermal driver, which supports the
> +	  temperature sensor embedded in Silabs SY7636A IC.
> +
>  source "drivers/thermal/tegra/Kconfig"
>  
>  config GENERIC_ADC_THERMAL
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 82fc3e616e54..2e1aca8a0a09 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
>  obj-y				+= intel/
>  obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
>  obj-y				+= st/
> +obj-$(CONFIG_SY7636A_THERMAL)	+= sy7636a_thermal.o
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>  obj-y				+= tegra/
>  obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> diff --git a/drivers/thermal/sy7636a_thermal.c b/drivers/thermal/sy7636a_thermal.c
> new file mode 100644
> index 000000000000..9e58305ca3ce
> --- /dev/null
> +++ b/drivers/thermal/sy7636a_thermal.c
> @@ -0,0 +1,94 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Functions to access SY3686A power management chip temperature
> + *
> + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
> + *
> + * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@xxxxxxxxxxxxxx>
> + *          Alistair Francis <alistair@xxxxxxxxxxxxx>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +#include <linux/mfd/sy7636a.h>
> +
> +static int sy7636a_get_temp(void *arg, int *res)
> +{
> +	unsigned int mode_ctr;
> +	int ret, reg_val;
> +	struct regmap *regmap = arg;
> +	bool isVoltageActive;
> +
> +	ret = regmap_read(regmap,
> +			SY7636A_REG_OPERATION_MODE_CRL, &mode_ctr);
> +	if (ret)
> +		return ret;
> +
> +	isVoltageActive = mode_ctr & SY7636A_OPERATION_MODE_CRL_ONOFF;
> +
> +	/* If operation mode isn't set to control, then let's set it. */
> +	if (!isVoltageActive) {
> +		ret = regmap_write(regmap,
> +				SY7636A_REG_OPERATION_MODE_CRL,
> +				mode_ctr | SY7636A_OPERATION_MODE_CRL_ONOFF);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = regmap_read(regmap,
> +			SY7636A_REG_TERMISTOR_READOUT, &reg_val);
> +	if (ret)
> +		return ret;
> +
> +	/* Restore the operation mode if it wasn't set */
> +	if (!isVoltageActive) {
> +		ret = regmap_write(regmap,
> +				SY7636A_REG_OPERATION_MODE_CRL,
> +				mode_ctr);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	*res = reg_val * 1000;
> +
> +	return ret;
> +}
> +
> +static const struct thermal_zone_of_device_ops ops = {
> +	.get_temp	= sy7636a_get_temp,
> +};
> +
> +static int sy7636a_thermal_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
> +	struct thermal_zone_device *thermal_zone_dev;
> +
> +	thermal_zone_dev = devm_thermal_zone_of_sensor_register(
> +			pdev->dev.parent,
> +			0,
> +			regmap,
> +			&ops);
> +
> +	return PTR_ERR_OR_ZERO(thermal_zone_dev);
> +}
> +
> +static const struct platform_device_id sy7636a_thermal_id_table[] = {
> +	{ "sy7636a-thermal", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, sy7636a_thermal_id_table);
> +
> +static struct platform_driver sy7636a_thermal_driver = {
> +	.driver = {
> +		.name = "sy7636a-thermal",
> +	},
> +	.probe = sy7636a_thermal_probe,
> +	.id_table = sy7636a_thermal_id_table,
> +};
> +module_platform_driver(sy7636a_thermal_driver);
> +
> +MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("SY7636A thermal driver");
> +MODULE_LICENSE("GPL v2");