Convert the MFD part of Samsung S5M8767 PMIC to DT schema format. Previously the bindings were mostly in mfd/samsung,sec-core.txt. Since all of bindings for Samsung S2M and S5M family of PMICs were converted from mfd/samsung,sec-core.txt to respective dtschema file, remove the former one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../bindings/mfd/samsung,s5m8767.yaml | 269 ++++++++++++++++++ .../bindings/mfd/samsung,sec-core.txt | 86 ------ MAINTAINERS | 2 +- 3 files changed, 270 insertions(+), 87 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml new file mode 100644 index 000000000000..b2529a48c890 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S5M8767 is a Power Management IC which includes voltage + and current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s5m8767-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s5m8767.yaml + description: + List of child nodes that specify the regulators. + + s5m8767,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck3-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck3 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck4-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck4 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck-ds-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for selecting GPIO DVS lines. + It is one-to-one mapped to dvs gpio lines. + + s5m8767,pmic-buck2-uses-gpio-dvs: + type: boolean + description: buck2 can be controlled by gpio dvs. + + s5m8767,pmic-buck3-uses-gpio-dvs: + type: boolean + description: buck3 can be controlled by gpio dvs. + + s5m8767,pmic-buck4-uses-gpio-dvs: + type: boolean + description: buck4 can be controlled by gpio dvs. + + s5m8767,pmic-buck-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32-array + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + s5m8767,pmic-buck-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for dvs. + + wakeup-source: true + +required: + - compatible + - reg + - regulators + - s5m8767,pmic-buck-ds-gpios + +dependencies: + s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ] + s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ] + s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ] + +additionalProperties: false + +allOf: + - if: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck3-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck4-uses-gpio-dvs: false + + - if: + required: + - s5m8767,pmic-buck4-uses-gpio-dvs + then: + properties: + s5m8767,pmic-buck2-uses-gpio-dvs: false + s5m8767,pmic-buck3-uses-gpio-dvs: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + s5m8767,pmic-buck2-uses-gpio-dvs; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, + <&gpd1 1 GPIO_ACTIVE_LOW>, + <&gpd1 2 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt deleted file mode 100644 index c68cdd365153..000000000000 --- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +++ /dev/null @@ -1,86 +0,0 @@ -Binding for Samsung S2M and S5M family multi-function device -============================================================ - -This is a part of device tree bindings for S2M and S5M family multi-function -devices. - -The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family -of multi-function devices which include voltage and current regulators, RTC, -charger controller, clock outputs and other sub-blocks. It is interfaced -to the host controller using an I2C interface. Each sub-block is usually -addressed by the host system using different I2C slave addresses. - - -This document describes bindings for main device node. Optional sub-blocks -must be a sub-nodes to it. Bindings for them can be found in: - - bindings/regulator/samsung,s2mpa01.txt - - bindings/regulator/samsung,s2mps11.txt - - bindings/regulator/samsung,s5m8767.txt - - bindings/clock/samsung,s2mps11.txt - - -Required properties: - - compatible: Should be one of the following - - "samsung,s2mpa01-pmic", - - "samsung,s2mps11-pmic", - - "samsung,s2mps13-pmic", - - "samsung,s2mps14-pmic", - - "samsung,s2mps15-pmic", - - "samsung,s2mpu02-pmic", - - "samsung,s5m8767-pmic". - - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. - -Optional properties: - - interrupts: Interrupt specifiers for interrupt sources. - - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled - down. When the system is suspended it will always go down thus triggerring - unwanted buck warm reset (setting buck voltages to default values). - - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is - connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 - register to turn off the power. Usually the ACOKB is pulled up to VBATT so - when PWRHOLD pin goes low, the rising ACOKB will trigger power off. - -Example: - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - - s2m_osc: clocks { - compatible = "samsung,s2mps11-clk"; - #clock-cells = <1>; - clock-output-names = "xx", "yy", "zz"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index dc931242a7f9..e086102e8340 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16638,7 +16638,7 @@ L: linux-samsung-soc@xxxxxxxxxxxxxxx S: Supported F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml -F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt +F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml F: drivers/clk/clk-s2mps11.c -- 2.30.2
