On Thu, 07 Oct 2021 15:46:40 +0200, Vincent Whitchurch wrote: > Hardware may require some time for the muxed analog signals to settle > after the muxing is changed. Allow this time to be specified in the > devicetree. > > Signed-off-by: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx> > --- > .../devicetree/bindings/iio/multiplexer/io-channel-mux.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/1537724 adc0mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc10mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc11mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc12mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc13mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc1mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc2mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc3mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc4mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc5mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc6mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc7mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc8mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml adc9mux: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dt.yaml envelope-detector-mux: channels: ['', '', 'sync-1', 'in', 'out', 'sync-2', 'sys-reg', 'ana-reg'] has non-unique elements arch/arm/boot/dts/at91-tse850-3.dt.yaml
