Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt
controller properties ('interrupt-controller' and '#interrupt-cells').
The interrupts property is no longer needed so remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-pma8084.dtsi | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index fcee2afe6740..7b8a8d9695da 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -43,14 +43,8 @@ pma8084_mpps: mpps@a000 {
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pma8084_mpps 0 0 8>;
- interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
- <0 0xa1 0 IRQ_TYPE_NONE>,
- <0 0xa2 0 IRQ_TYPE_NONE>,
- <0 0xa3 0 IRQ_TYPE_NONE>,
- <0 0xa4 0 IRQ_TYPE_NONE>,
- <0 0xa5 0 IRQ_TYPE_NONE>,
- <0 0xa6 0 IRQ_TYPE_NONE>,
- <0 0xa7 0 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
pma8084_temp: temp-alarm@2400 {
--
2.30.2
