[net-next PATCH v2 07/15] net: dsa: qca8k: add support for mac6_exchange, sgmii falling edge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some device set the switch to exchange the mac0 port with mac6 port. Add
support for this in the qca8k driver. Also add support for SGMII rx/tx
clock falling edge. This is only present for pad0, pad5 and pad6 have
these bit reserved from Documentation.

Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx>
Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
---
 drivers/net/dsa/qca8k.c | 33 +++++++++++++++++++++++++++++++++
 drivers/net/dsa/qca8k.h |  3 +++
 2 files changed, 36 insertions(+)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 5bce7ac4dea7..3a040a3ed58e 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -973,6 +973,34 @@ qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
 	return ret;
 }
 
+static int
+qca8k_setup_port0_pad_ctrl_reg(struct qca8k_priv *priv)
+{
+	struct device_node *node = priv->dev->of_node;
+	u32 mask = 0;
+	int ret = 0;
+
+	/* Swap MAC0-MAC6 */
+	if (of_property_read_bool(node, "qca,mac6-exchange"))
+		mask |= QCA8K_PORT0_PAD_CTRL_MAC06_EXCHG;
+
+	/* SGMII Clock phase configuration */
+	if (of_property_read_bool(node, "qca,sgmii-rxclk-falling-edge"))
+		mask |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+	if (of_property_read_bool(node, "qca,sgmii-txclk-falling-edge"))
+		mask |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+	if (mask)
+		ret = qca8k_rmw(priv, QCA8K_REG_PORT0_PAD_CTRL,
+				QCA8K_PORT0_PAD_CTRL_MAC06_EXCHG |
+				QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+				QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+				mask);
+
+	return ret;
+}
+
 static int
 qca8k_setup(struct dsa_switch *ds)
 {
@@ -1006,6 +1034,11 @@ qca8k_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	/* Configure additional PORT0_PAD_CTRL properties */
+	ret = qca8k_setup_port0_pad_ctrl_reg(priv);
+	if (ret)
+		return ret;
+
 	/* Enable CPU Port */
 	ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
 			    QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index fc7db94cc0c9..3fded69a6839 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -35,6 +35,9 @@
 #define   QCA8K_MASK_CTRL_DEVICE_ID_MASK		GENMASK(15, 8)
 #define   QCA8K_MASK_CTRL_DEVICE_ID(x)			((x) >> 8)
 #define QCA8K_REG_PORT0_PAD_CTRL			0x004
+#define   QCA8K_PORT0_PAD_CTRL_MAC06_EXCHG		BIT(31)
+#define   QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE	BIT(19)
+#define   QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE	BIT(18)
 #define QCA8K_REG_PORT5_PAD_CTRL			0x008
 #define QCA8K_REG_PORT6_PAD_CTRL			0x00c
 #define   QCA8K_PORT_PAD_RGMII_EN			BIT(26)
-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux