On Thu, Oct 07, 2021 at 08:41:59PM +0530, Prasanna Vengateshan wrote:
> Support for fdb_add, mdb_add, fdb_del, mdb_del and
> fdb_dump operations. ALU1 and ALU2 are used for fdb operations.
>
> fdb_add: find any existing entries and update the port map.
> if ALU1 write is failed and attempt to write ALU2.
> If ALU2 is also failed then exit. Clear WRITE_FAIL for both ALU1
> & ALU2.
>
> fdb_del: find the matching entry and clear the respective port
> in the port map by writing the ALU tables
>
> fdb_dump: read and dump 2 ALUs upto last entry. ALU_START bit is
> used to find the last entry. If the read is timed out, then pass
> the error message.
>
> mdb_add: Find the empty slot in ALU and update the port map &
> mac address by writing the ALU
>
> mdb_del: find the matching entry and delete the respective port
> in port map by writing the ALU
>
> For MAC address, could not use upper_32_bits() & lower_32_bits()
> as per Vladimir proposal since it gets accessed in terms of 16bits.
> I tried to have common API to get 16bits based on index but shifting
> seems to be straight-forward.
>
> Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@xxxxxxxxxxxxx>
> ---
Reviewed-by: Vladimir Oltean <olteanv@xxxxxxxxx>
> +static int lan937x_port_fdb_dump(struct dsa_switch *ds, int port,
> + dsa_fdb_dump_cb_t *cb, void *data)
> +{
> + if (alu.port_forward & BIT(port)) {
> + ret = cb(alu.mac, alu.fid, alu.is_static, data);
A bit strange that you report the FID and not the VID here.
> + if (ret)
> + goto exit;
> + }
> + } while (lan937x_data & ALU_START);
> +
> +exit:
> + /* stop ALU search & continue to next ALU if available */
> + ret = ksz_write32(dev, REG_SW_ALU_CTRL(i), 0);
> + }
> +
> + mutex_unlock(&dev->alu_mutex);
> +
> + return ret;
> +}
