Re: [PATCH v6 1/2] iio: adc: ad799x: Implement selecting external reference voltage input on AD7991, AD7995 and AD7999.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 30 Sep 2021 12:42:48 +0200
Florian Boor <florian.boor@xxxxxxxxxxxxxxxxx> wrote:

> Make use of the AD7991_REF_SEL bit and support using the external
> reference voltage if 'vref-supply' is present. Use VCC voltage supply
> as reference if no extra reference is supplied.
> 
> Signed-off-by: Florian Boor <florian.boor@xxxxxxxxxxxxxxxxx>

Hi Florian,

Applied, but there were are whole bunch of trailing white space issues in here
that I manually fixed up.

Please run checkpatch.pl over future patches

Applied to the togreg branch of iio.git and pushed out as testing to
see what 0-day makes of it.

Thanks,

Jonathan
> ---
> 
> Changes in v6:
> - Minor documentation change (label and contact info)
> 
> Changes in v5:
> - Correct errors in documentation found by
>   'make DT_CHECKER_FLAGS=-m dt_binding_check'
>   + Reduce title length
>   + Move information to description
>   + Add I²C bits to example
> 
> Changes in v4:
> - Check devm_regulator_get_optional() return value and
>   handle values other from -ENODEV separately.
> - Update documentation description
> 
> Changes in v3:
> - Do not create dummy reference regulator, check for vref presence where needed.
> - Use VCC as reference if no extra reference voltage is provided
> - Add interrupt information to documentation
> 
> Changes in v2:
> - Check if a provided external vref regulator is provided.
> - Drop unused setting
> - Add ad79xx documentation (second patch)
> 
> 
>  drivers/iio/adc/ad799x.c | 68 ++++++++++++++++++++++++++++++----------
>  1 file changed, 51 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
> index 18bf8386d50a..b67b3076d76e 100644
> --- a/drivers/iio/adc/ad799x.c
> +++ b/drivers/iio/adc/ad799x.c
> @@ -299,7 +299,11 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
>  			GENMASK(chan->scan_type.realbits - 1, 0);
>  		return IIO_VAL_INT;
>  	case IIO_CHAN_INFO_SCALE:
> -		ret = regulator_get_voltage(st->vref);
> +		if (st->vref)
> +			ret = regulator_get_voltage(st->vref);
> +		else
> +			ret = regulator_get_voltage(st->reg);
> +		
>  		if (ret < 0)
>  			return ret;
>  		*val = ret / 1000;
> @@ -770,6 +774,7 @@ static int ad799x_probe(struct i2c_client *client,
>  				   const struct i2c_device_id *id)
>  {
>  	int ret;
> +	int extra_config = 0;
>  	struct ad799x_state *st;
>  	struct iio_dev *indio_dev;
>  	const struct ad799x_chip_info *chip_info =
> @@ -797,14 +802,36 @@ static int ad799x_probe(struct i2c_client *client,
>  	ret = regulator_enable(st->reg);
>  	if (ret)
>  		return ret;
> -	st->vref = devm_regulator_get(&client->dev, "vref");
> +		
> +	/* check if an external reference is supplied */
> +	st->vref = devm_regulator_get_optional(&client->dev, "vref");
> +
>  	if (IS_ERR(st->vref)) {
> -		ret = PTR_ERR(st->vref);
> -		goto error_disable_reg;
> +		if (PTR_ERR(st->vref) == -ENODEV) {
> +			st->vref = NULL;
> +			dev_info(&client->dev, "Using VCC reference voltage\n");
> +		} else {
> +			ret = PTR_ERR(st->vref);
> +			goto error_disable_reg;
> +		}
> +	}
> +		
> +	if (st->vref) {
> +		/* 
> +		 * Use external reference voltage if supported by hardware.
> +		 * This is optional if voltage / regulator present, use VCC otherwise.
> +		 */
> +		if ((st->id == ad7991) || (st->id == ad7995) || (st->id == ad7999)) {
> +			dev_info(&client->dev, "Using external reference voltage\n");
> +			extra_config |= AD7991_REF_SEL;
> +			ret = regulator_enable(st->vref);
> +			if (ret)
> +				goto error_disable_reg;
> +		} else {
> +			st->vref = NULL;
> +			dev_warn(&client->dev, "Supplied reference not supported\n");
> +		}
>  	}
> -	ret = regulator_enable(st->vref);
> -	if (ret)
> -		goto error_disable_reg;
>  
>  	st->client = client;
>  
> @@ -815,7 +842,7 @@ static int ad799x_probe(struct i2c_client *client,
>  	indio_dev->channels = st->chip_config->channel;
>  	indio_dev->num_channels = chip_info->num_channels;
>  
> -	ret = ad799x_update_config(st, st->chip_config->default_config);
> +	ret = ad799x_update_config(st, st->chip_config->default_config | extra_config);
>  	if (ret)
>  		goto error_disable_vref;
>  
> @@ -845,7 +872,8 @@ static int ad799x_probe(struct i2c_client *client,
>  error_cleanup_ring:
>  	iio_triggered_buffer_cleanup(indio_dev);
>  error_disable_vref:
> -	regulator_disable(st->vref);
> +	if (st->vref) 
> +		regulator_disable(st->vref);
>  error_disable_reg:
>  	regulator_disable(st->reg);
>  
> @@ -860,7 +888,8 @@ static int ad799x_remove(struct i2c_client *client)
>  	iio_device_unregister(indio_dev);
>  
>  	iio_triggered_buffer_cleanup(indio_dev);
> -	regulator_disable(st->vref);
> +	if (st->vref) 
> +		regulator_disable(st->vref);
>  	regulator_disable(st->reg);
>  	kfree(st->rx_buf);
>  
> @@ -872,7 +901,8 @@ static int __maybe_unused ad799x_suspend(struct device *dev)
>  	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
>  	struct ad799x_state *st = iio_priv(indio_dev);
>  
> -	regulator_disable(st->vref);
> +	if (st->vref) 
> +		regulator_disable(st->vref);
>  	regulator_disable(st->reg);
>  
>  	return 0;
> @@ -889,17 +919,21 @@ static int __maybe_unused ad799x_resume(struct device *dev)
>  		dev_err(dev, "Unable to enable vcc regulator\n");
>  		return ret;
>  	}
> -	ret = regulator_enable(st->vref);
> -	if (ret) {
> -		regulator_disable(st->reg);
> -		dev_err(dev, "Unable to enable vref regulator\n");
> -		return ret;
> +
> +	if (st->vref) {
> +		ret = regulator_enable(st->vref);
> +		if (ret) {
> +			regulator_disable(st->reg);
> +			dev_err(dev, "Unable to enable vref regulator\n");
> +			return ret;
> +		}
>  	}
>  
>  	/* resync config */
>  	ret = ad799x_update_config(st, st->config);
>  	if (ret) {
> -		regulator_disable(st->vref);
> +		if (st->vref) 
> +			regulator_disable(st->vref);
>  		regulator_disable(st->reg);
>  		return ret;
>  	}




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux