Hi Pratyush,
Thank you for the patch.
On Wed, Sep 15, 2021 at 05:32:32PM +0530, Pratyush Yadav wrote:
> This resets the stream state machines and FIFOs, giving them a clean
> slate. On J721E if the streams are not reset before starting the
> capture, the captured frame gets wrapped around vertically on every run
> after the first.
>
> Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
> ---
>
> (no changes since v1)
>
> drivers/media/platform/cadence/cdns-csi2rx.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> index c06e039a1aa8..e05d76394cd6 100644
> --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> @@ -39,6 +39,7 @@
> #define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100)
>
> #define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000)
> +#define CSI2RX_STREAM_CTRL_SOFT_RST BIT(4)
> #define CSI2RX_STREAM_CTRL_START BIT(0)
>
> #define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008)
> @@ -135,12 +136,22 @@ struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev)
>
> static void csi2rx_reset(struct csi2rx_priv *csi2rx)
> {
> + int i;
i is always positive, it can be an unsigned int. With this,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> +
> writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT,
> csi2rx->base + CSI2RX_SOFT_RESET_REG);
>
> udelay(10);
>
> writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG);
> +
> + /* Reset individual streams. */
> + for (i = 0; i < csi2rx->max_streams; i++) {
> + writel(CSI2RX_STREAM_CTRL_SOFT_RST,
> + csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
> + usleep_range(10, 20);
> + writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i));
> + }
> }
>
> static int csi2rx_configure_external_dphy(struct csi2rx_priv *csi2rx)
--
Regards,
Laurent Pinchart
