Document new binding qca,power_on_sel used to enable Power-on-strapping select reg and qca,led_open_drain to set led to open drain mode. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> --- Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt index 550f4313c6e0..4f6ef9f9e024 100644 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt @@ -13,6 +13,10 @@ Required properties: Optional properties: - reset-gpios: GPIO to be used to reset the whole device +- qca,package48: Set to 48-pin mode required in some QCA8327 switches. +- qca,power-on-sel: Enable Power-on-strapping select required in some QCA8327 + switches. +- qca,led-open-drain: Set leds to open-drain mode. - qca,mac6-exchange: Internally swap MAC0 and MAC6. - qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. -- 2.32.0
