>From original QCA source code the port was set to prefer master as port type in 1000BASE-T mode. Apply the same settings also here. Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx> --- drivers/net/phy/at803x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 71237a4e85a3..851d47b8a331 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -1325,6 +1325,9 @@ static int qca83xx_config_init(struct phy_device *phydev) at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, QCA8327_DEBUG_MANU_CTRL_EN, 0); + /* Following original QCA sourcecode set port to prefer master */ + phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); + return 0; } -- 2.32.0
