On Sunday, August 10, 2014 6:15 PM, Andreas Farber wrote:
> Am 05.08.2014 13:16, schrieb Jingoo Han:
> > On Saturday, August 02, 2014 5:57 AM, Tomasz Figa wrote:
> >> On 01.08.2014 22:54, Andreas Färber wrote:
> >>> Am 01.08.2014 22:33, schrieb Doug Anderson:
> >>>> On Thu, Jul 31, 2014 at 9:54 PM, Andreas Färber <afaerber@xxxxxxx> wrote:
> >>>>> Spring uses a different GPIO, so this is not a generic SoC piece.
> >>>>>
> >>>>> Suggested-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> >>>>> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> >>>>> ---
> >>>>> v5: New (Tomasz Figa)
> >>>>> Frees dp_hpd for Spring.
> >>>>>
> >>>>> arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 7 -------
> >>>>> arch/arm/boot/dts/exynos5250-smdk5250.dts | 9 +++++++++
> >>>>> arch/arm/boot/dts/exynos5250-snow.dts | 7 +++++++
> >>>>> 3 files changed, 16 insertions(+), 7 deletions(-)
> >>>>>
> >>>>> diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-
> pinctrl.dtsi
> >>>>> index 886cfca044ac..ed0e5230514b 100644
> >>>>> --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> >>>>> +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
> >>>>> @@ -581,13 +581,6 @@
> >>>>> samsung,pin-pud = <0>;
> >>>>> samsung,pin-drv = <0>;
> >>>>> };
> >>>>> -
> >>>>> - dp_hpd: dp_hpd {
> >>>>> - samsung,pins = "gpx0-7";
> >>>>> - samsung,pin-function = <3>;
> >>>>> - samsung,pin-pud = <0>;
> >>>>> - samsung,pin-drv = <0>;
> >>>>> - };
> >>>>> };
> >>>>>
> >>>>> pinctrl@13400000 {
> >>>>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-
> smdk5250.dts
> >>>>> index aaa055ac0fe3..5d30fe1dcda4 100644
> >>>>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> >>>>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> >>>>> @@ -414,3 +414,12 @@
> >>>>> };
> >>>>> };
> >>>>> };
> >>>>> +
> >>>>> +&pinctrl_0 {
> >>>>> + dp_hpd: dp_hpd {
> >>>>> + samsung,pins = "gpx0-7";
> >>>>> + samsung,pin-function = <3>;
> >>>>> + samsung,pin-pud = <0>;
> >>>>> + samsung,pin-drv = <0>;
> >>>>> + };
> >>>>> +};
> >>>>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
> >>>>> index c4b0c73c736d..a9a2f2743794 100644
> >>>>> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> >>>>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> >>>>> @@ -547,6 +547,13 @@
> >>>>> };
> >>>>>
> >>>>> &pinctrl_0 {
> >>>>> + dp_hpd: dp_hpd {
> >>>>> + samsung,pins = "gpx0-7";
> >>>>> + samsung,pin-function = <3>;
> >>>>> + samsung,pin-pud = <0>;
> >>>>> + samsung,pin-drv = <0>;
> >>>>> + };
> >>>>> +
> >>>>
> >>>> NAK. dp_hpd is a generic SoC piece. Pin function 0 and 1 are GPIOs.
> >>>> Pin function 3 is special function. This pin _is_ the hot plug detect
> >>>> pin for display port. When it's set as special function 3 it goes
> >>>> straight into the hot plug logic of the display port controller.
> >>>>
> >>>> Spring may have had its reasons to detect hot plug events on a GPIO
> >>>> instead of using this pin, but that doesn't make this pin any less the
> >>>> "hot plug pin".
> >>>
> >>> Please advise how to handle it then: Should there be two different
> >>> pinctrl entries (if so, how should it be named?),
> >>
> >> IMHO this is the right way. Just name the GPIO variant dp_hpd_gpio.
> >
> > Hi Andreas Färber,
> >
> > I agree with Tomasz Figa and Doug Anderson.
> > Please refer to the following.
> >
> > 1. case: Standard HPD pin is used. (smdk5420)
> > arch/arm/boot/dts/exynos5420-pinctrl.dts
> > pinctrl@13400000 {
> > dp_hpd: dp_hpd {
> > samsung,pins = "gpx0-7";
> > samsung,pin-function = <3>;
> > samsung,pin-pud = <0>;
> > samsung,pin-drv = <0>;
> > };
> > arch/arm/boot/dts/exynos5420-smdk5420.dts
> > dp-controller@145B0000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&dp_hpd>;
> > ...
> >
> > 2. case: non-standard HPD pin such as GPIO is used. (peach pit)
> > arch/arm/boot/dts/exynos5420-peach-pit.dts
> > pinctrl@13400000 {
> > dp_hpd_gpio: dp_hpd_gpio {
> > samsung,pins = "gpx2-6";
> > samsung,pin-function = <0>;
> > samsung,pin-pud = <3>;
> > samsung,pin-drv = <0>;
> > };
> > dp-controller@145B0000 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&dp_hpd_gpio>;
> > ...
> > samsung,hpd-gpio = <&gpx2 6 0>;
> >
> > So, you need to follow the second case.
> > "dp_hpd_gpio" can be used for Spring board.
>
> I believe I already did so in v6 [0]? Please take a look there and let
> me know if you still need anything changed. The label name seems
> identical, whereas for the node name I adopted the dashes convention.
OK, I checked v6 patches.
I have no objection. It looks good.
Thank you.
Best regards,
Jingoo Han
>
> Thanks,
> Andreas
>
> [0] https://patchwork.kernel.org/patch/4664691/
>
> --
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
