Re: [PATCH v4 08/11] media: ti: Add CSI2RX support for J721E

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/10/21 11:28PM, Sakari Ailus wrote:
> Hi Pratyush,
> 
> On Wed, Sep 15, 2021 at 05:32:37PM +0530, Pratyush Yadav wrote:
> ...
> > +/*
> > + * Find the input format. This is done by finding the first device in the
> > + * pipeline which can tell us the current format. This could be the sensor, or
> > + * this could be another device in the middle which is capable of format
> > + * conversions.
> > + */
> > +static int ti_csi2rx_validate_pipeline(struct ti_csi2rx_dev *csi)
> > +{
> > +	struct media_pipeline *pipe = &csi->pipe;
> > +	struct media_entity *entity;
> > +	struct v4l2_subdev *sd;
> > +	struct v4l2_subdev_format fmt;
> > +	struct v4l2_pix_format *pix = &csi->v_fmt.fmt.pix;
> > +	struct media_device *mdev = &csi->mdev;
> > +	const struct ti_csi2rx_fmt *ti_fmt;
> > +	int ret;
> > +
> > +	mutex_lock(&mdev->graph_mutex);
> > +	ret = media_graph_walk_init(&pipe->graph, mdev);
> > +	if (ret) {
> > +		mutex_unlock(&mdev->graph_mutex);
> > +		return ret;
> > +	}
> > +
> > +	media_graph_walk_start(&pipe->graph, &csi->vdev.entity);
> > +
> > +	while ((entity = media_graph_walk_next(&pipe->graph))) {
> > +		if (!is_media_entity_v4l2_subdev(entity))
> > +			continue;
> 
> You shouldn't rely on media_graph_walk_next() to return entities in a
> particular order.

Ah, right. Need to drop this.

> 
> I'd suggest approach taken in isp_video_check_external_subdevs() (in
> drivers/media/platform/omap3isp/ispvideo.c).
> 
> > +
> > +		sd = media_entity_to_v4l2_subdev(entity);
> > +
> > +		fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > +		fmt.pad = media_get_pad_index(entity, 0, PAD_SIGNAL_DEFAULT);
> > +
> > +		ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
> > +		if (ret && ret != -ENOIOCTLCMD) {
> > +			media_graph_walk_cleanup(&pipe->graph);
> > +			mutex_unlock(&mdev->graph_mutex);
> > +			return ret;
> > +		}
> > +
> > +		if (!ret)
> > +			break;
> > +	}
> > +
> > +	media_graph_walk_cleanup(&pipe->graph);
> > +	mutex_unlock(&mdev->graph_mutex);
> > +
> > +	/* Could not find input format. */
> > +	if (!entity)
> > +		return -EPIPE;
> > +
> > +	if (fmt.format.width != pix->width)
> > +		return -EPIPE;
> > +	if (fmt.format.height != pix->height)
> > +		return -EPIPE;
> 
> Pipeline validation should take place during media_pipeline_start(). Why
> are you doing it here?

How would be do that? Via the link_validate callback?

> 
> > +
> > +	ti_fmt = find_format_by_pix(pix->pixelformat);
> > +	if (WARN_ON(!ti_fmt))
> > +		return -EINVAL;
> > +
> > +	if (fmt.format.code == MEDIA_BUS_FMT_YUYV8_2X8 ||
> > +	    fmt.format.code == MEDIA_BUS_FMT_VYUY8_2X8 ||
> > +	    fmt.format.code == MEDIA_BUS_FMT_YVYU8_2X8) {
> > +		dev_err(csi->dev,
> > +			"Only UYVY input allowed for YUV422 8-bit. Output format can be configured.\n");
> > +		return -EPIPE;
> > +	}
> > +
> > +	if (fmt.format.code == MEDIA_BUS_FMT_UYVY8_2X8) {
> > +		/* Format conversion between YUV422 formats can be done. */
> > +		if (ti_fmt->code != MEDIA_BUS_FMT_UYVY8_2X8 &&
> > +		    ti_fmt->code != MEDIA_BUS_FMT_YUYV8_2X8 &&
> > +		    ti_fmt->code != MEDIA_BUS_FMT_VYUY8_2X8 &&
> > +		    ti_fmt->code != MEDIA_BUS_FMT_YVYU8_2X8)
> > +			return -EPIPE;
> > +	} else if (fmt.format.code != ti_fmt->code) {
> > +		return -EPIPE;
> > +	}
> > +
> > +	if (fmt.format.field != V4L2_FIELD_NONE &&
> > +	    fmt.format.field != V4L2_FIELD_ANY)
> > +		return -EPIPE;
> > +
> > +	return 0;
> > +}
> > +
> > +static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int count)
> > +{
> > +	struct ti_csi2rx_dev *csi = vb2_get_drv_priv(vq);
> > +	struct ti_csi2rx_dma *dma = &csi->dma;
> > +	struct ti_csi2rx_buffer *buf, *tmp;
> > +	unsigned long flags = 0;
> 
> No need to assign flags here.

Ok.

> 
> > +	int ret = 0;
> > +
> 
> -- 
> Kind regards,
> 
> Sakari Ailus

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux