This series adds support for the on-chip PHY used for USB 1.1 and 2.0 found on STiH415 and STiH416 consumer electronics SoC's from STMicroelectronics. Changes since v1: - Change to select GENERIC_PHY rather than depends for uniformity - Ensure phy_provider_register is called after PHY is created - Add extra commit message for MAINTAINERS patch Peter Griffin (3): phy: phy-stih41x-usb: Add usb phy support for STiH41x SoCs. phy: phy-stih41x-usb: Add dt documentation for USB phy on STiH415/6 MAINTAINERS: Add phy-stih41x-usb.c to ARCH/STI architecture .../devicetree/bindings/phy/phy-stih41x-usb.txt | 24 +++ MAINTAINERS | 1 + drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 1 + drivers/phy/phy-stih41x-usb.c | 187 +++++++++++++++++++++ 5 files changed, 221 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-stih41x-usb.txt create mode 100644 drivers/phy/phy-stih41x-usb.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html