[PATCH] dt-bindings: display/bridge: sil,sii9234: Convert to YAML binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the Silicon Image SiI9234 HDMI/MHL bridge documentation to YAML.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
 .../bindings/display/bridge/sii9234.txt       |  49 --------
 .../bindings/display/bridge/sil,sii9234.yaml  | 110 ++++++++++++++++++
 2 files changed, 110 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/sii9234.txt
 create mode 100644 Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
deleted file mode 100644
index a55bf77bd960..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Silicon Image SiI9234 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible : "sil,sii9234".
-	- reg : I2C address for TPI interface, use 0x39
-	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
-	- iovcc18-supply : I/O Supply Voltage (1.8V)
-	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
-	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin (active low)
-	- video interfaces: Device node can contain two video interface port
-			    nodes for HDMI encoder and connector according to [1].
-			    - port@0 - MHL to HDMI
-			    - port@1 - MHL to connector
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-
-Example:
-	sii9234@39 {
-		compatible = "sil,sii9234";
-		reg = <0x39>;
-		avcc33-supply = <&vcc33mhl>;
-		iovcc18-supply = <&vcc18mhl>;
-		avcc12-supply = <&vsil12>;
-		cvcc12-supply = <&vsil12>;
-		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpf3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				mhl_to_connector: endpoint {
-					remote-endpoint = <&connector_to_mhl>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 000000000000..f88ddfe4818b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+  - Maciej Purski <m.purski@xxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: sil,sii9234
+
+  reg:
+    description: I2C address for TPI interface
+    maxItems: 1
+
+  avcc12-supply:
+    description: TMDS Analog Supply Voltage, 1.2V
+
+  avcc33-supply:
+    description: MHL/USB Switch Supply Voltage, 3.3V
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage, 1.2V
+
+  iovcc18-supply:
+    description: I/O voltage supply, 1.8V
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the reset pin.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - avcc12-supply
+  - avcc33-supply
+  - cvcc12-supply
+  - iovcc18-supply
+  - interrupts
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@39 {
+        compatible = "sil,sii9234";
+        reg = <0x39>;
+        avcc12-supply = <&vsil12>;
+        avcc33-supply = <&vcc33mhl>;
+        cvcc12-supply = <&vsil12>;
+        iovcc18-supply = <&vcc18mhl>;
+        interrupt-parent = <&gpf3>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            mhl_to_hdmi: endpoint {
+              remote-endpoint = <&hdmi_to_mhl>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            mhl_to_connector: endpoint {
+              remote-endpoint = <&connector_to_mhl>;
+            };
+          };
+        };
+      };
+    };
+
+...
-- 
2.33.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux