* Drew Fustini <drew@xxxxxxxx> [210826 01:20]: > Switch the compatible for the am33xx_pinmux pin controller node from > pinctrl-single to pinconf-single. The only change between these two > compatibles is that PCS_HAS_PINCONF will be true. This then allows > pinconf properties to be utilized. > > The purpose of this change is to allow the PocketBeagle to use: > > pinctrl-single,bias-pullup > pinctrl-single,bias-pulldown > > This dts already defines these properites for gpio pins in the default > pinctrl state but it has no effect unless PCS_HAS_PINCONF is set. > > The bias properties can then be modified on the corresponding gpio lines > through the gpiod uapi. The mapping between the pins and gpio lines is > defined by gpio-ranges under the gpio controller nodes in am33xx-l4.dtsi Thanks applying into omap-for-v5.16/dt. Tony
