Re: lets settle the LED `function` property regarding the netdev trigger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marek,

On 10/4/21 5:08 PM, Marek Behún wrote:
On Mon, 4 Oct 2021 16:50:09 +0200
Andrew Lunn <andrew@xxxxxxx> wrote:

Hello Andrew,

I am aware of this, and in fact am working on a proposal for an
extension of netdev LED extension, to support the different link
modes. (And also to support for multi-color LEDs.)

But I am not entirely sure whether these different link modes should be
also definable via device-tree. Are there devices with ethernet LEDs
dedicated for a specific speed? (i.e. the manufacturer says in the
documentation of the device, or perhaps on the device's case, that this
LED shows 100M/1000M link, and that other LED is shows 10M link?)
If so, that this should be specified in the devicetree, IMO. But are
such devices common?

I have a dumb 5 port switch next to me. One port is running at 1G. Its
left green LED is on and blinks with traffic. Another port of the
switch is running at 100Mbps and its right orange LED is on, blinks
for traffic. And there is text on the case saying 10/100 orange, 1G
green.

I think this is pretty common. You generally do want to know if 10/100
is being used, it can indicate problems. Same for a 10G port running
at 1G, etc.

OK then. I will work no a proposal for device tree bindings for this.

And what about multi-color LEDs? There are ethernet ports where one LED
is red-green, and so can generate red, green, and yellow color. Should
device tree also define which color indicates which mode?

There are two different ways this can be implemented. There can be two
independent LEDs within the same package. So you can generate three
colours. Or there can be two cross connected LEDs within the
package. Apply +ve you get one colour, apply -ve you get a different
colour. Since you cannot apply both -ve and +ve at the same time, you
cannot get both colours at once.

If you have two independent LEDs, I would define two LEDs in DT.

No, we have multicolor LED API which is meant for exactly this
situation: a multicolor LED.

Multicolor LED framework is especially useful for the arrangements
where we want to have a possibility of controlling mixed LED color
in a wide range.
In the discussed case it seems that having two separate LED class
devices will be sufficient. Unless the LEDs have 255 or so possible
brightness levels each and they can produce meaningful mixed color
per some device state.

(I am talking about something like the KJ2518D-262 from
  http://www.rego.com.tw/product_detail.php?prdt_id=258
  which has Green/Orange on left and Yellow on right side.
  The left Green/Orange LED has 3 pins, and so it can mix the colors into
  yellow.)

Things get tricky for the two dependency LEDs. Does the LED core have
support for such LEDs?

Unfortunately not yet. The multicolor API supports LEDs where the
sub-leds are independent.

What do you mean by dependency here? You can write LED multicolor class
driver that will aggregate whatever LEDs you want, provided that it will
know how to control them. However, the target use case was RGB LED
controllers.

This is where we need to strike a balance between too simple and too
complex. Implement most of the common features, but don't support
exotic stuff, like two dependency LEDs?

I think the best solution here would be a subclass "enumcolor" (or
different name), where you can choose between several pre-defined colors.
In sysfs you could then do
   echo 1 >brightness
   echo green >color
   echo yellow >color

There already are other people who need to register such LEDs.

Marek


--
Best regards,
Jacek Anaszewski



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux