Re: [PATCH v7 0/7] Add OTG mode support to Tegra USB PHY and Nexus 7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 12, 2021 at 09:17:11PM +0300, Dmitry Osipenko wrote:
> This series adds USB OTG mode support to the NVIDIA Tegra USB PHY driver
> and Nexus 7 tablet.
> 
> Changelog:
> 
> v7: - v6 partially missed 5.15 kernel, only the power/supply patches has
>       been merged. Re-sending the remaining patches for 5.16. The usb/phy
>       patch needs ack from the subsystem maintainer.
> 
> v6: - Added r-b from Rob Herring to the OTG properties DT binding patch.
> 
>     - Corrected "smb347-charger: generic regmap caching" patch, it now
>       sets the .num_reg_defaults_raw, initializing cache properly.
> 
>     - Added new patch "smb347-charger: Add missing pin control activation",
>       which prevents never-enabled charging on Nexus 7.
> 
>     - The "otg-fsm: Fix hrtimer list corruption" patch of v5 was already
>       applied to next, so it's not included anymore.
> 
> v5: - Replaced "Remove caching of charger state" patch with "Utilize
>       generic regmap caching" after Sebastian's notice about disabled
>       regmap caching.
> 
> v4: - Added r-b from Rob Herring.
> 
>     - Added unevaluatedProperties into SMB binding for VBUS regulator,
>       which was Requested by Rob Herring.
> 
>     - Added cell to nvidia,pmc phandle instead of explicit h/w ID
>       property. Requested by Rob Herring.
> 
>     - Added stack trace to commit message and ack from Peter Chen to
>       OTG FSM patch.
> 
> v3: - Further improved interrupt handling in the PHY driver by removing
>       assumption that interrupt is enabled by the CI driver at the time
>       of set_wakeup() invocation, which makes this function a bit more
>       universal.
> 
> v2: - The PHY's interrupt is now enabled from PHY's set_wakeup() callback.
>       It prevents getting a spurious interrupt during the CI driver probe
>       time.
> 
> 
> Dmitry Osipenko (7):
>   dt-bindings: phy: tegra20-usb-phy: Convert to schema
>   dt-bindings: phy: tegra20-usb-phy: Document properties needed for OTG
>     mode
>   soc/tegra: pmc: Expose USB regmap to all SoCs
>   usb: phy: tegra: Support OTG mode programming
>   ARM: tegra: Add new properties to USB PHY device-tree nodes
>   ARM: tegra: nexus7: Enable USB OTG mode
>   arm64: tegra132: Add new properties to USB PHY device-tree node

I've applied patches 3 and 5-7 to the Tegra tree.

Thanks,
Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux