After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> --- Changes in v2: None. I'm not sure what's the best way to apply this patch... It might be easiest to apply the two ARM32 dts patches to the arm64 branch. (It does not seem to cause any conflicts at the moment...) --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts | 3 +++ 2 files changed, 4 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8cb859728bd9..0a53bbd9d7b1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -960,6 +960,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq8064-rb3011.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ + qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts new file mode 100644 index 000000000000..dee2c20af355 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "arm64/qcom/msm8916-samsung-serranove.dts" +#include "qcom-msm8916-smp.dtsi" -- 2.33.0
