Re: [PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/10/2021 16:41, Rob Herring wrote:
> On Fri, Oct 01, 2021 at 11:41:02AM +0200, Krzysztof Kozlowski wrote:
>> Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
>> ---
>>  .../bindings/regulator/samsung,s5m8767.txt    | 140 ------------------
>>  .../bindings/regulator/samsung,s5m8767.yaml   |  83 +++++++++++
>>  MAINTAINERS                                   |   2 +-
>>  3 files changed, 84 insertions(+), 141 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
>>  create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
>> deleted file mode 100644
>> index 6cd83d920155..000000000000
>> --- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
>> +++ /dev/null
>> @@ -1,140 +0,0 @@
>> -Binding for Samsung S5M8767 regulator block
>> -===========================================
>> -
>> -This is a part of device tree bindings for S5M family multi-function devices.
>> -More information can be found in bindings/mfd/sec-core.txt file.
>> -
>> -The S5M8767 device provide buck and LDO regulators.
>> -
>> -To register these with regulator framework instantiate under main device node
>> -a sub-node named "regulators" with more sub-nodes for each regulator using the
>> -common regulator binding documented in:
>> - - Documentation/devicetree/bindings/regulator/regulator.txt
>> -
>> -
>> -Required properties of the main device node (the parent!):
>> - - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
>> -   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
>> -
>> - [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
>> -     property is specified, then all the eight voltage values for the
>> -     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
>> -
>> -Optional properties of the main device node (the parent!):
>> - - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
>> -   units for buck2 when changing voltage using gpio dvs. Refer to [1] below
>> -   for additional information.
>> -
>> - - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
>> -   units for buck3 when changing voltage using gpio dvs. Refer to [1] below
>> -   for additional information.
>> -
>> - - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
>> -   units for buck4 when changing voltage using gpio dvs. Refer to [1] below
>> -   for additional information.
>> -
>> - - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
>> - - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
>> - - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
>> -
>> -Additional properties required if either of the optional properties are used:
>> -
>> - - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
>> -   the possible 8 options selectable by the dvs gpios. The value of this
>> -   property should be between 0 and 7. If not specified or if out of range, the
>> -   default value of this property is set to 0.
>> -
>> - - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
>> -   for dvs. The format of the gpio specifier depends in the gpio controller.
>> -
>> -
>> -Names of regulators supported by S5M8767 device:
>> -	- LDOn
>> -		  - valid values for n are 1 to 28
>> -		  - Example: LDO1, LDO2, LDO28
>> -	- BUCKn
>> -		  - valid values for n are 1 to 9.
>> -		  - Example: BUCK1, BUCK2, BUCK9
>> -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
>> -as per the datasheet of device.
>> -
>> -
>> -Optional properties of the nodes under "regulators" sub-node:
>> - - op_mode: describes the different operating modes of the LDO's with
>> -            power mode change in SOC. The different possible values are,
>> -             0 - always off mode
>> -             1 - on in normal mode
>> -             2 - low power mode
>> -             3 - suspend mode
>> - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
>> -                                   GPIO controlling this regulator
>> -                                   (enable/disable); This is valid only
>> -                                   for buck9.
>> -
>> -Example:
>> -
>> -	s5m8767_pmic@66 {
>> -		compatible = "samsung,s5m8767-pmic";
>> -		reg = <0x66>;
>> -
>> -		s5m8767,pmic-buck2-uses-gpio-dvs;
>> -		s5m8767,pmic-buck3-uses-gpio-dvs;
>> -		s5m8767,pmic-buck4-uses-gpio-dvs;
>> -
>> -		s5m8767,pmic-buck-default-dvs-idx = <0>;
>> -
>> -		s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
>> -						 <&gpx0 1 0>, /* DVS2 */
>> -						 <&gpx0 2 0>; /* DVS3 */
>> -
>> -		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
>> -						<&gpx2 4 0>, /* SET2 */
>> -						<&gpx2 5 0>; /* SET3 */
>> -
>> -		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
>> -						 <1250000>, <1200000>,
>> -						 <1150000>, <1100000>,
>> -						 <1000000>, <950000>;
>> -
>> -		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
>> -						 <1100000>, <1100000>,
>> -						 <1000000>, <1000000>,
>> -						 <1000000>, <1000000>;
>> -
>> -		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
>> -						 <1200000>, <1200000>,
>> -						 <1200000>, <1200000>,
>> -						 <1200000>, <1200000>;
>> -
>> -		regulators {
>> -			ldo1_reg: LDO1 {
>> -				regulator-name = "VDD_ABB_3.3V";
>> -				regulator-min-microvolt = <3300000>;
>> -				regulator-max-microvolt = <3300000>;
>> -				op_mode = <1>; /* Normal Mode */
>> -			};
>> -
>> -			ldo2_reg: LDO2 {
>> -				regulator-name = "VDD_ALIVE_1.1V";
>> -				regulator-min-microvolt = <1100000>;
>> -				regulator-max-microvolt = <1100000>;
>> -				regulator-always-on;
>> -			};
>> -
>> -			buck1_reg: BUCK1 {
>> -				regulator-name = "VDD_MIF_1.2V";
>> -				regulator-min-microvolt = <950000>;
>> -				regulator-max-microvolt = <1350000>;
>> -				regulator-always-on;
>> -				regulator-boot-on;
>> -			};
>> -
>> -			vemmc_reg: BUCK9 {
>> -				regulator-name = "VMEM_VDD_2.8V";
>> -				regulator-min-microvolt = <2800000>;
>> -				regulator-max-microvolt = <2800000>;
>> -				op_mode = <3>; /* Standby Mode */
>> -				s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
>> -			};
>> -		};
>> -	};
>> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
>> new file mode 100644
>> index 000000000000..3192a06b5ef9
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
>> @@ -0,0 +1,83 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Samsung S5M8767 Power Management IC regulators
>> +
>> +maintainers:
>> +  - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
>> +
>> +description: |
>> +  This is a part of device tree bindings for S2M and S5M family of Power
>> +  Management IC (PMIC).
>> +
>> +  The S5M8767 provides buck and LDO regulators.
>> +
>> +  See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
>> +  additional information and example.
>> +
>> +patternProperties:
>> +  # 28 LDOs
>> +  "^LDO([1-9]|1[0-9]|2[0-8])$":
>> +    type: object
>> +    $ref: regulator.yaml#
>> +    description:
>> +      Properties for single LDO regulator.
>> +
>> +    properties:
>> +      regulator-name: true
> 
> This is fine, but technically it is not needed. There's not any 
> requirement that items in 'required' be listed under 'properties'.

I'll skip it here and in further patches - smaller bindings.

> 
>> +
>> +      op_mode:
> 
> Needs a type reference.

Indeed, thanks.

> 
>> +        enum: [0, 1, 2, 3]
>> +        default: 1
>> +        description: |
>> +          Describes the different operating modes of the LDO's with power mode
>> +          change in SOC. The different possible values are:
>> +            0 - always off mode
>> +            1 - on in normal mode
>> +            2 - low power mode
>> +            3 - suspend mode
>> +
>> +    required:
>> +      - regulator-name
>> +
>> +    unevaluatedProperties: false
> 
> On child nodes, I think it's better to place this up with the $ref and 
> 'type: object' since the indentation can be hard to follow. 

OK.


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux