On 28-09-21, 14:21, Rob Herring wrote:
> The spear13xx PCI 'interrupt-map' property is not parse-able.
> '#interrupt-cells' is missing and there are 3 #address-cells. Based on the
> driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
> is not needed.
>
> Cc: Viresh Kumar <vireshk@xxxxxxxxxx>
> Cc: Shiraz Hashim <shiraz.linux.kernel@xxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/spear1310.dtsi | 6 ------
> arch/arm/boot/dts/spear1340.dtsi | 2 --
> 2 files changed, 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
> index c4b49baf9804..2f746a9428a7 100644
> --- a/arch/arm/boot/dts/spear1310.dtsi
> +++ b/arch/arm/boot/dts/spear1310.dtsi
> @@ -82,8 +82,6 @@ pcie0: pcie@b1000000 {
> reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> reg-names = "dbi", "config";
> interrupts = <0 68 0x4>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0x0 0 &gic 0 68 0x4>;
> num-lanes = <1>;
> phys = <&miphy0 1>;
> phy-names = "pcie-phy";
> @@ -101,8 +99,6 @@ pcie1: pcie@b1800000 {
> reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
> reg-names = "dbi", "config";
> interrupts = <0 69 0x4>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0x0 0 &gic 0 69 0x4>;
> num-lanes = <1>;
> phys = <&miphy1 1>;
> phy-names = "pcie-phy";
> @@ -120,8 +116,6 @@ pcie2: pcie@b4000000 {
> reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
> reg-names = "dbi", "config";
> interrupts = <0 70 0x4>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0x0 0 &gic 0 70 0x4>;
> num-lanes = <1>;
> phys = <&miphy2 1>;
> phy-names = "pcie-phy";
> diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
> index 1a8f5e8b10e3..827e887afbda 100644
> --- a/arch/arm/boot/dts/spear1340.dtsi
> +++ b/arch/arm/boot/dts/spear1340.dtsi
> @@ -47,8 +47,6 @@ pcie0: pcie@b1000000 {
> reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> reg-names = "dbi", "config";
> interrupts = <0 68 0x4>;
> - interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0x0 0 &gic 0 68 0x4>;
> num-lanes = <1>;
> phys = <&miphy0 1>;
> phy-names = "pcie-phy";
Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
--
viresh
