The Allwinner R329 and D1 SoCs contain an LED controller designed to drive a series of RGB LED pixels. It supports PIO and DMA transfers, and has configurable timing and pixel format. Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- Changes from v1: - Fixed typo leading to duplicate t1h-ns property - Removed "items" layer in definition of dmas/dma-names - Replaced uint32 type reference with maxItems in timing properties .../leds/allwinner,sun50i-r329-ledc.yaml | 140 ++++++++++++++++++ 1 file changed, 140 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml diff --git a/Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml b/Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml new file mode 100644 index 000000000000..d70cb2393a2e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/allwinner,sun50i-r329-ledc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner R329 LED Controller Bindings + +maintainers: + - Samuel Holland <samuel@xxxxxxxxxxxx> + +description: + The LED controller found in Allwinner sunxi SoCs uses a one-wire serial + interface to drive up to 1024 RGB LEDs. + +properties: + compatible: + oneOf: + - const: allwinner,sun50i-r329-ledc + - items: + - enum: + - allwinner,sun20i-d1-ledc + - const: allwinner,sun50i-r329-ledc + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + items: + - description: Bus clock + - description: Module clock + + clock-names: + items: + - const: bus + - const: mod + + resets: + maxItems: 1 + + dmas: + maxItems: 1 + description: TX DMA channel + + dma-names: + const: tx + + interrupts: + maxItems: 1 + + vled-supply: + description: Regulator supplying power to external LEDs + + format: + description: Pixel format (subpixel transmission order), default is "grb" + enum: + - "bgr" + - "brg" + - "gbr" + - "grb" + - "rbg" + - "rgb" + + t0h-ns: + maxItems: 1 + description: Length of high pulse when transmitting a "0" bit + + t0l-ns: + maxItems: 1 + description: Length of low pulse when transmitting a "0" bit + + t1h-ns: + maxItems: 1 + description: Length of high pulse when transmitting a "1" bit + + t1l-ns: + maxItems: 1 + description: Length of low pulse when transmitting a "1" bit + + treset-ns: + maxItems: 1 + description: Minimum delay between transmission frames + +patternProperties: + "^multi-led@[0-9a-f]+$": + type: object + $ref: leds-class-multicolor.yaml# + properties: + reg: + minimum: 0 + maximum: 1023 + description: Index of the LED in the series (must be contiguous) + + required: + - reg + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - dmas + - dma-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + + ledc: led-controller@2008000 { + compatible = "allwinner,sun20i-d1-ledc", + "allwinner,sun50i-r329-ledc"; + reg = <0x2008000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ccu 12>, <&ccu 34>; + clock-names = "bus", "mod"; + resets = <&ccu 12>; + dmas = <&dma 42>; + dma-names = "tx"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; + + multi-led@0 { + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + }; + }; + +... -- 2.32.0
