Add WPSS PIL loading support for SC7280 SoCs. Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx> --- .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 196 +++++++++++++++++++++ 1 file changed, 196 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml new file mode 100644 index 0000000..bb62760 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml @@ -0,0 +1,196 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7280 WPSS Peripheral Image Loader + +maintainers: + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> + +description: + This document defines the binding for a component that loads and boots firmware + on the Qualcomm Technology Inc. WPSS. + +properties: + compatible: + enum: + - qcom,sc7280-wpss-pil + + reg: + maxItems: 1 + description: + The base address and size of the qdsp6ss register + + interrupts: + minItems: 6 + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + - description: Shutdown acknowledge interrupt + + interrupt-names: + minItems: 6 + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + - const: shutdown-ack + + clocks: + minItems: 4 + items: + - description: GCC WPSS AHB BDG Master clock + - description: GCC WPSS AHB clock + - description: GCC WPSS RSCP clock + - description: XO clock + + clock-names: + minItems: 4 + items: + - const: ahb_bdg + - const: ahb + - const: rscp + - const: xo + + power-domains: + minItems: 2 + items: + - description: CX power domain + - description: MX power domain + + power-domain-names: + minItems: 2 + items: + - const: cx + - const: mx + + resets: + minItems: 2 + items: + - description: AOSS restart + - description: PDC SYNC + + reset-names: + minItems: 2 + items: + - const: restart + - const: pdc_sync + + memory-region: + maxItems: 1 + description: Reference to the reserved-memory for the Hexagon core + + qcom,halt-regs: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandle reference to a syscon representing TCSR followed by the + three offsets within syscon for q6, modem and nc halt registers. + + qcom,qmp: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference to the AOSS side-channel message RAM. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the Hexagon core + items: + - description: Stop the modem + + qcom,smem-state-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: The names of the state bits used for SMP2P output + items: + - const: stop + + glink-edge: + type: object + description: + Qualcomm G-Link subnode which represents communication edge, channels + and devices related to the ADSP. + +required: + - compatible + - reg + - interrupts-extended + - interrupt-names + - clocks + - clock-names + - power-domains + - power-domain-names + - reset + - reset-names + - qcom,halt-regs + - memory-region + - qcom,qmp + - qcom,smem-states + - qcom,smem-state-names + - glink-edge + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/reset/qcom,sdm845-aoss.h> + #include <dt-bindings/reset/qcom,sdm845-pdc.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pil"; + reg = <0x08a00000 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", "ahb", + "rscp", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_mutex 0x37000>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; -- 2.7.4
