Convert the regulators of Samsung S2MPA01 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
.../bindings/regulator/samsung,s2mpa01.txt | 79 -------------------
.../bindings/regulator/samsung,s2mpa01.yaml | 69 ++++++++++++++++
2 files changed, 69 insertions(+), 79 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
deleted file mode 100644
index bae3c7f838cf..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Binding for Samsung S2MPA01 regulator block
-===========================================
-
-This is a part of device tree bindings for S2M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPA01 device provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Names of regulators supported by S2MPA01 device:
- - LDOn
- - valid values for n are 1 to 26
- - Example: LDO1, LD02, LDO26
- - BUCKn
- - valid values for n are 1 to 10.
- - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of buck regulator nodes under "regulators" sub-node:
- - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
- (default), 25000, or 50000. May be 0 for disabling the ramp delay on
- BUCK{1,2,3,4}.
-
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
- Note: Some bucks share the ramp rate setting i.e. same ramp value
- will be set for a particular group of bucks so provide the same
- regulator-ramp-delay value for them.
- Groups sharing ramp rate:
- - buck{1,6},
- - buck{2,4},
- - buck{8,9,10}.
-
-Example:
-
- s2mpa01_pmic@66 {
- compatible = "samsung,s2mpa01-pmic";
- reg = <0x66>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
new file mode 100644
index 000000000000..f2c39d183263
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S2MPA01 provides buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for
+ additional information and example.
+
+patternProperties:
+ # 26 LDOs
+ "^LDO([1-9]|1[0-9]|2[0-6])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 10 bucks
+ "^BUCK([1-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ regulator-ramp-delay:
+ enum: [0, 6250, 12500, 25000, 50000]
+ default: 12500
+ description: |
+ May be 0 for disabling the ramp delay on BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+ Note: Some bucks share the ramp rate setting i.e. same ramp value
+ will be set for a particular group of bucks so provide the same
+ regulator-ramp-delay value for them.
+ Groups sharing ramp rate:
+ * buck{1,6},
+ * buck{2,4},
+ * buck{8,9,10}.
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
--
2.30.2
