From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
VDD_SOC should be 800 mV in suspend and 850 mV in run mode. VDD_DRAM
should be 950 mV for DDR clock frequencies of 1.5 GHz.
This information is taken from the datasheet and the uboot-imx code.
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 03b3516abd64..b12fb7ce6686 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -92,10 +92,12 @@ regulators {
reg_vdd_soc: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <900000>;
+ regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <850000>;
+ nxp,dvs-standby-voltage = <800000>;
};
reg_vdd_arm: BUCK2 {
@@ -111,7 +113,7 @@ reg_vdd_arm: BUCK2 {
reg_vdd_dram: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <900000>;
+ regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
};
--
2.33.0
