These patches to add support for dwc2 controller found in Rockchip processors rk3066, rk3188 and rk3288, and enable dts for rk3288 evb. Changes in v5: - max_transfer_size change to 65535 to met the requirement of header file - change the sort order of dwc2 in rk3288.dtsi - don't enable otg port for evb Changes in v4: - max_transfer_size change to 65536, this should be enough for most transfer, the hardware auto-detect will set this to 0x7ffff which may make dma_alloc_coherent fail when non-dword aligned buf from driver like usbnet happen. - remove EHCI and HSIC dts patch for Doug had post it seprately. Changes in v3: - EHCI and HSIC move new for version 3. - Rebase Changes in v2: - Split out dr_mode and rk3288 bindings. - add compatible "snps,dwc2" bingding info - set most parameters as driver auto-detect - evb patch added in version 2 Kever Yang (4): Documentation: dt-bindings: add dt binding info for Rockchip dwc2 usb: dwc2: add compatible data for rockchip soc ARM: dts: add rk3288 dwc2 controller support ARM: dts: Enable USB host1(dwc) on rk3288-evb Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++ arch/arm/boot/dts/rk3288-evb.dtsi | 4 ++++ arch/arm/boot/dts/rk3288.dtsi | 20 ++++++++++++++++++ drivers/usb/dwc2/platform.c | 29 ++++++++++++++++++++++++++ 4 files changed, 56 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
