Hi Bjorn, On 9/24/21 12:23 AM, Bjorn Andersson wrote:
The variant of the ADC Thermal Monitor block found in e.g. PM8998 is "HC", add support for this variant to the ADC TM5 driver in order to support using VADC channels as thermal_zones on SDM845 et al. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- Changes since v1: - New patch drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 43 +++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c index 8494cc04aa21..7fe5cf28ae15 100644 --- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c +++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c @@ -82,6 +82,7 @@ struct adc_tm5_data { const u32 full_scale_code_volt; unsigned int *decimation; unsigned int *hw_settle; + bool is_hc; };enum adc_tm5_cal_method {@@ -146,6 +147,14 @@ static const struct adc_tm5_data adc_tm5_data_pmic = { 64000, 128000 }, };+static const struct adc_tm5_data adc_tm_hc_data_pmic = {+ .full_scale_code_volt = 0x70e4, + .decimation = (unsigned int []) { 256, 512, 1024 }, + .hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700, + 1000, 2000, 4000, 6000, 8000, 10000 }, + .is_hc = true, +}; + static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len) { return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len); @@ -375,6 +384,31 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm) return 0; }+static int adc_tm_hc_init(struct adc_tm5_chip *chip)+{ + unsigned int i; + u8 buf[2]; + int ret; + + for (i = 0; i < chip->nchannels; i++) { + if (chip->channels[i].channel >= ADC_TM5_NUM_CHANNELS) { + dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel); + return -EINVAL; + } + } + + buf[0] = chip->decimation; + buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN; + + ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf)); + if (ret) { + dev_err(chip->dev, "block write failed: %d\n", ret); + return ret; + }
if (ret) dev_err(chip->dev, "block write failed: %d\n", ret); above should be sufficient here and similarly in adc_tm5_init().
+ + return ret; +} + static int adc_tm5_init(struct adc_tm5_chip *chip) { u8 buf[4], channels_available; @@ -591,7 +625,10 @@ static int adc_tm5_probe(struct platform_device *pdev) return ret; }- ret = adc_tm5_init(adc_tm);+ if (adc_tm->data->is_hc) + ret = adc_tm_hc_init(adc_tm); + else + ret = adc_tm5_init(adc_tm); if (ret) { dev_err(dev, "adc-tm init failed\n"); return ret; @@ -612,6 +649,10 @@ static const struct of_device_id adc_tm5_match_table[] = { .compatible = "qcom,spmi-adc-tm5", .data = &adc_tm5_data_pmic, }, + { + .compatible = "qcom,spmi-adc-tm-hc", + .data = &adc_tm_hc_data_pmic, + }, { } }; MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
-- Best wishes, Vladimir
