Re: [PATCH v5] arm64: zynqmp: Add support for Xilinx Kria SOM board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 22 Sep 2021 09:07:32 +0200, Michal Simek wrote:
> There are couple of revisions of SOMs (k26) and associated carrier cards
> (kv260).
> SOM itself has two major versions:
> sm-k26 - SOM with EMMC
> smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
> in QSPI.
> 
> SOMs are describing only devices available on the SOM or connections which
> are described in specification (for example UART, fwuen).
> 
> When SOM boots out of QSPI it uses limited number of peripherals defined by
> the specification and present in sm(k)-k26 dtses.
> Then a carrier card (CC) detection is happening and DT overlay is applied
> to brings new functionality. That's why DT overlays are used. The name is
> composed together with SOM name and CC name that's why DT overlays with
> these names are generated to make sure they can be used together.
> 
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
> 
> Changes in v5:
> - Extend commit message.
> 
> Changes in v4:
> - Remove ina260 and usb5744 nodes
> - Remove compatible string from overlays
> 
> Changes in v3:
> - Fix led node name
> - Fix compatible string for xlnx,zynqmp-sk-kv260-revA/Y/Z
> - Fix headers alignment
> - Move USB3 PHY properties from DWC3 node to USB node - reported by Manish
>   Narani
> - Change dtb names generated with dtbo
> - Fix emmc comment style
> 
> Changes in v2:
> - Use sugar syntax - reported by Geert
> - Update copyright years
> - Fix SD3.0 comment alignment
> - Remove one newline from Makefile
> 
> https://www.xilinx.com/products/som/kria.html
> Based on
> https://lore.kernel.org/r/cover.1628244703.git.michal.simek@xxxxxxxxxx
> 
> ---
>  .../devicetree/bindings/arm/xilinx.yaml       |  16 +
>  arch/arm64/boot/dts/xilinx/Makefile           |  13 +
>  .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts  | 315 ++++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts  | 298 +++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 289 ++++++++++++++++
>  .../boot/dts/xilinx/zynqmp-smk-k26-revA.dts   |  21 ++
>  6 files changed, 952 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
>  create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux