The series adds missing vdd-supply for QUSB2 PHY which is required for digital circuit. The driver works right now likely because firmware already sets it up. Add it to bindings, driver and DTS that miss the supply. It should not cause problem for existing DTBs: - SC7180, SDM630, SDM845 based platforms already specified vdd-supply in the DTBs. - MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator will ensure QUSB2 PHY driver works as before on these platforms. Shawn Guo (3): dt-bindings: phy: qcom,qusb2: Add missing vdd-supply phy: qcom-qusb2: Add missing vdd supply arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 ++++++ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++ arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 + drivers/phy/qualcomm/phy-qcom-qusb2.c | 2 +- 6 files changed, 12 insertions(+), 1 deletion(-) -- 2.17.1
