29.5V (29p5) is obviously wrong for regulator l4 and l5. Correct them
to be 2.95V (2p95). No functional change.
Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 849900e8b80e..11d0a8c1cf35 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -308,7 +308,7 @@
regulator-allow-set-load;
};
- vreg_l4b_29p5: l4 {
+ vreg_l4b_2p95: l4 {
regulator-min-microvolt = <2944000>;
regulator-max-microvolt = <2952000>;
regulator-enable-ramp-delay = <250>;
@@ -327,7 +327,7 @@
* Tighten the range to 1.8-3.328 (closest to 3.3) to
* make the mmc driver happy.
*/
- vreg_l5b_29p5: l5 {
+ vreg_l5b_2p95: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3328000>;
regulator-enable-ramp-delay = <250>;
@@ -559,14 +559,14 @@
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
- vmmc-supply = <&vreg_l4b_29p5>;
+ vmmc-supply = <&vreg_l4b_2p95>;
vqmmc-supply = <&vreg_l8a_1p8>;
};
&sdhc_2 {
status = "okay";
- vmmc-supply = <&vreg_l5b_29p5>;
+ vmmc-supply = <&vreg_l5b_2p95>;
vqmmc-supply = <&vreg_l2b_2p95>;
};
--
2.17.1
