Re: [PATCH v11 05/16] dt-bindings: display: mediatek: merge: add additional prop for mt8195

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Jason:

jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx> 於 2021年9月21日 週二 下午11:52寫道:
>
> add MERGE additional properties description for mt8195:
> 1. async clock
> 2. fifo setting enable
> 3. reset controller
>
> Signed-off-by: jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx>
> ---
>  .../display/mediatek/mediatek,merge.yaml      | 31 +++++++++++++++++++
>  1 file changed, 31 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> index 75beeb207ceb..542dd7137d3b 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> @@ -38,6 +38,19 @@ properties:
>    clocks:
>      items:
>        - description: MERGE Clock
> +      - description: MERGE Async Clock
> +          Controlling the synchronous process between MERGE and other display
> +          function blocks cross clock domain.
> +
> +  mediatek,merge-fifo-en:
> +    description:
> +      The setting of merge fifo is mainly provided for the display latency
> +      buffer to ensure that the back-end panel display data will not be
> +      underrun, a little more data is needed in the fifo.
> +      According to the merge fifo settings, when the water level is detected
> +      to be insufficient, it will trigger RDMA sending ultra and preulra
> +      command to SMI to speed up the data rate.
> +    type: boolean
>
>    mediatek,gce-client-reg:
>      description:
> @@ -50,6 +63,11 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/phandle-array
>      maxItems: 1
>
> +  resets:
> +    description: reset controller
> +      See Documentation/devicetree/bindings/reset/reset.txt for details.
> +    maxItems: 1
> +
>  required:
>    - compatible
>    - reg
> @@ -67,3 +85,16 @@ examples:
>          power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
>          clocks = <&mmsys CLK_MM_DISP_MERGE>;
>      };
> +
> +    merge5: disp_vpp_merge5@1c110000 {
> +        compatible = "mediatek,mt8195-disp-merge";
> +        reg = <0 0x1c110000 0 0x1000>;
> +        interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
> +        clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
> +                 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
> +        clock-names = "merge","merge_async";

Define clock-names first.

Regards,
Chun-Kuang.

> +        power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> +        mediatek,gce-client-reg = <&gce1 SUBSYS_1c11XXXX 0x0000 0x1000>;
> +        mediatek,merge-fifo-en = <1>;
> +        resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
> +    };
> --
> 2.18.0
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux