Re: [PATCH 6/6] dt-bindings: hwmon: jedec,jc42: add nxp,se97b

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 24, 2021 at 08:57:44AM +0200, Krzysztof Kozlowski wrote:
> On 23/09/2021 23:16, Rob Herring wrote:
> > On Mon, Sep 20, 2021 at 08:21:14PM +0200, Krzysztof Kozlowski wrote:
> >> Document bindings for NXP SE97B, a DDR memory module temperature sensor
> >> with integrated SPD and EEPROM via Atmel's AT24 interface.
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> >> ---
> >>  Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml | 9 +++++++++
> >>  1 file changed, 9 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> >> index a7bb4e3a1c46..0e49b3901161 100644
> >> --- a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> >> +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> >> @@ -10,6 +10,14 @@ maintainers:
> >>    - Jean Delvare <jdelvare@xxxxxxxx>
> >>    - Guenter Roeck <linux@xxxxxxxxxxxx>
> >>  
> >> +select:
> >> +  properties:
> >> +    compatible:
> >> +      const: jedec,jc-42.4-temp
> >> +
> >> +  required:
> >> +    - compatible
> >> +
> > 
> > Is this supposed to be in the last patch? And why is it needed?
> 
> Yes, this is here on purpose because of nxp,se97b which is sensor with
> at24-compatible EEPROM.
> 
> arch/arm/boot/dts/at91-nattis-2-natte-2.dts:
> 169         temp@18 {
> 170                 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> 
> 171                 reg = <0x18>;
> 172                 smbus-timeout-disable;
> 173         };
> 174
> 175         eeprom@50 {
> 176                 compatible = "nxp,se97b", "atmel,24c02";

How would that be handled anyway ? Yes, the chip includes both a temperature
sensor and an eeprom, but this node should most definitely not instantiate as
temperature sensor.

Guenter

> 177                 reg = <0x50>;
> 178                 pagesize = <16>;
> 
> Without the select, dtbs_check was complaining about the second node:
> 
> eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
> 	['nxp,se97b', 'atmel,24c02'] is too long
> 	Additional items are not allowed ('atmel,24c02' was unexpected)
> 	'jedec,jc-42.4-temp' was expected
> 	From schema:
> /home/dev/linux/linux/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> 
> eeprom@50: 'pagesize' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	From schema:
> /home/dev/linux/linux/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> 
> 
> >>  properties:
> >>    compatible:
> >>      oneOf:
> >> @@ -31,6 +39,7 @@ properties:
> >>                - microchip,mcp98244
> >>                - microchip,mcp9843
> >>                - nxp,se97
> >> +              - nxp,se97b
> >>                - nxp,se98
> >>                - onnn,cat6095
> >>                - onnn,cat34ts02
> >> -- 
> >> 2.30.2
> >>
> >>
> 
> 
> Best regards,
> Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux