在 2014年08月07日 10:16, Doug Anderson 写道:
Caesar,
On Wed, Aug 6, 2014 at 6:27 PM, caesar <caesar.wang@xxxxxxxxxxxxxx> wrote:
Doug,
在 2014年08月07日 06:46, Doug Anderson 写道:
Caesar,
On Thu, Jul 24, 2014 at 3:21 AM, Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
wrote:
+static const struct rockchip_pwm_data pwm_data_v1 = {
+ .regs.duty = PWM_HRC,
+ .regs.period = PWM_LRC,
+ .regs.cntr = PWM_CNTR,
+ .regs.ctrl = PWM_CTRL,
+ .prescaler = PRESCALER,
+ .set_enable = rockchip_pwm_set_enable_v1,
+};
+
+static const struct rockchip_pwm_data pwm_data_v2 = {
+ .regs.duty = PWM_LRC,
+ .regs.period = PWM_HRC,
+ .regs.cntr = PWM_CNTR,
+ .regs.ctrl = PWM_CTRL,
+ .prescaler = PRESCALER-1,
+ .set_enable = rockchip_pwm_set_enable_v2,
+};
+
+static const struct rockchip_pwm_data pwm_data_vop = {
+ .regs.duty = PWM_LRC,
+ .regs.period = PWM_HRC,
+ .regs.cntr = PWM_CTRL,
+ .regs.ctrl = PWM_CNTR,
Did you really mean to flip CTRL and CNTR here? If so, that's super
confusing and deserves a comment. AKA, I think the above should not
be:
+ .regs.cntr = PWM_CTRL,
+ .regs.ctrl = PWM_CNTR,
...but should be
+ .regs.cntr = PWM_CNTR,
+ .regs.ctrl = PWM_CTRL,
If you didn't mean to flip CTRL and CNTR here, then just get rid of
pwm_data_vop and refer to pwm_data_v2. In fact, I'd suggest that you
totally remove the "rockchip,vop-pwm" since there's nothing different
between "rockchip,rk3288-pwm" and "rockchip,vop-pwm".
Sorry,I think it's no problem. the "rockchip,rk3288-pwm" and
"rockchip,vop-pwm" are seperate PWM controllers.
They are just different registers address between CNTR and CTRL .
OK, I looked up in the TRM. Right, the CNTR and CTRL are flipped on
the vop. So I think that the only change you need is to add:
#define PWM_VOP_CTRL 0x00
#define PWM_VOP_CNTR 0x0c
...then use these new #defines for the vop structure.
As you have the code written right now it's very confusing. The new
#defines will fix this.
yeah, I think they can be used in the same context.
I will fix it in patch v5 if it is really need.
Have you validated Thierry's suggestion to allow you to access your
memory range?
Yes,we have solve it in lcdc driver.
The Mark Yao have the submission in [0].
[0]: https://lkml.org/lkml/2014/8/4/20
Excellent! Then we should be able to land after you fix the above.
-Doug
OK,Thanks!
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html