Make operating point definitions comply with binding
specifications.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6sll.dtsi | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 04f8d637a501..0f148f498374 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -51,20 +51,18 @@ cpu0: cpu@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 996000 1275000
- 792000 1175000
- 396000 1075000
- 198000 975000
- >;
- fsl,soc-operating-points = <
+ <996000 1275000>,
+ <792000 1175000>,
+ <396000 1075000>,
+ <198000 975000>;
+ fsl,soc-operating-points =
/* ARM kHz SOC-PU uV */
- 996000 1175000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <996000 1175000>,
+ <792000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
clocks = <&clks IMX6SLL_CLK_ARM>,
--
2.30.2
