Add a node for SPMI to allow for communication with on-board PMICs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index c2c5cc30307b..0c50a8f9414c 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -546,6 +546,24 @@ aoss_qmp: power-controller@c300000 {
#power-domain-cells = <1>;
};
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0xc440000 0 0x1100>,
+ <0 0xc600000 0 0x2000000>,
+ <0 0xe600000 0 0x100000>,
+ <0 0xe700000 0 0xa0000>,
+ <0 0xc40a000 0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
tlmm: pinctrl@f100000 {
compatible = "qcom,sm6350-tlmm";
reg = <0 0x0f100000 0 0x300000>;
--
2.33.0
