No functional change too, prepare for mt8195 IOMMU support bank functions.
Some global control settings are in bank0 while the other banks have
their bank independent setting. Here only move the global control
settings and the independent registers together.
Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 48 +++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 725e000eee0f..ac31fe8b7aaf 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -731,30 +731,6 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
}
writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
- regval = F_L2_MULIT_HIT_EN |
- F_TABLE_WALK_FAULT_INT_EN |
- F_PREETCH_FIFO_OVERFLOW_INT_EN |
- F_MISS_FIFO_OVERFLOW_INT_EN |
- F_PREFETCH_FIFO_ERR_INT_EN |
- F_MISS_FIFO_ERR_INT_EN;
- writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0);
-
- regval = F_INT_TRANSLATION_FAULT |
- F_INT_MAIN_MULTI_HIT_FAULT |
- F_INT_INVALID_PA_FAULT |
- F_INT_ENTRY_REPLACEMENT_FAULT |
- F_INT_TLB_MISS_FAULT |
- F_INT_MISS_TRANSACTION_FIFO_FAULT |
- F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
- writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
-
- if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
- regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
- else
- regval = lower_32_bits(data->protect_base) |
- upper_32_bits(data->protect_base);
- writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
-
if (data->enable_4GB &&
MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
/*
@@ -788,6 +764,30 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
}
writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
+ regval = F_L2_MULIT_HIT_EN |
+ F_TABLE_WALK_FAULT_INT_EN |
+ F_PREETCH_FIFO_OVERFLOW_INT_EN |
+ F_MISS_FIFO_OVERFLOW_INT_EN |
+ F_PREFETCH_FIFO_ERR_INT_EN |
+ F_MISS_FIFO_ERR_INT_EN;
+ writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0);
+
+ regval = F_INT_TRANSLATION_FAULT |
+ F_INT_MAIN_MULTI_HIT_FAULT |
+ F_INT_INVALID_PA_FAULT |
+ F_INT_ENTRY_REPLACEMENT_FAULT |
+ F_INT_TLB_MISS_FAULT |
+ F_INT_MISS_TRANSACTION_FIFO_FAULT |
+ F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
+ writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
+
+ if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
+ regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
+ else
+ regval = lower_32_bits(data->protect_base) |
+ upper_32_bits(data->protect_base);
+ writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
+
if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
dev_name(data->dev), (void *)data)) {
writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
--
2.18.0
