Re: [PATCH v2 3/3] arm64: dts: renesas: falcon-cpu: Add DSI display output

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

Hi Kieran,

Thank you for the patch.

On Thu, Sep 02, 2021 at 12:53:30AM +0100, Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> 
> Provide the display output using the sn65dsi86 MIPI DSI bridge.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> ---
>  .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
> index a0a1a1da0d87..5530bb82de6b 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
> @@ -66,6 +66,15 @@ memory@700000000 {
>  		reg = <0x7 0x00000000 0x0 0x80000000>;
>  	};
>  
> +	reg_1p2v: regulator-1p2v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-1.2V";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;

1.8V is a weird voltage for a 1.2V regulator :-)

> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
>  	reg_1p8v: regulator-1p8v {
>  		compatible = "regulator-fixed";
>  		regulator-name = "fixed-1.8V";
> @@ -83,6 +92,46 @@ reg_3p3v: regulator-3p3v {
>  		regulator-boot-on;
>  		regulator-always-on;
>  	};
> +
> +	mini-dp-con {
> +		compatible = "dp-connector";
> +		label = "CN5";
> +		type = "mini";
> +
> +		port {
> +			mini_dp_con_in: endpoint {
> +				remote-endpoint = <&sn65dsi86_out>;
> +			};
> +		};
> +	};
> +
> +	sn65dsi86_refclk: sn65dsi86-refclk {

I'd name the node x6-clk after the components on the board (or clk-x6).
The label can stay the same, up to you.

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <38400000>;
> +	};
> +};
> +
> +&dsi0 {
> +	status = "okay";
> +
> +	clocks = <&cpg CPG_MOD 415>,
> +		 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
> +		 <&extal_clk>;
> +	clock-names = "fck", "dsi", "extal";

As discussed separately, this should go to r8a79a0.dtsi, and the last
clock should be named "pll".

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +
> +	ports {
> +		port@1 {
> +			endpoint {
> +				remote-endpoint = <&sn65dsi86_in>;
> +				data-lanes = <1 2 3 4>;
> +			};
> +		};
> +	};
> +};
> +
> +&du {
> +	status = "okay";
>  };
>  
>  &extal_clk {
> @@ -114,6 +163,41 @@ &i2c1 {
>  
>  	status = "okay";
>  	clock-frequency = <400000>;
> +
> +	sn65dsi86@2c {
> +		compatible = "ti,sn65dsi86";
> +		reg = <0x2c>;
> +
> +		clocks = <&sn65dsi86_refclk>;
> +		clock-names = "refclk";
> +
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		vccio-supply = <&reg_1p8v>;
> +		vpll-supply = <&reg_1p8v>;
> +		vcca-supply = <&reg_1p2v>;
> +		vcc-supply = <&reg_1p2v>;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				sn65dsi86_in: endpoint {
> +					remote-endpoint = <&dsi0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				sn65dsi86_out: endpoint {
> +					remote-endpoint = <&mini_dp_con_in>;
> +				};
> +			};
> +		};
> +	};
>  };
>  
>  &i2c6 {

-- 
Regards,

Laurent Pinchart