Define the Koelsch board dependent part of the VIN1 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN1 and ADV7180 devices. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> --- This patch is against the 'renesas-devel-v3.16-20140804' tag of Simon Horman's 'renesas.git' repo. It requires the 'soc_camera' and 'rcar_vin' device tree support patches (already merged to the 'media_tree.git' repo) in order to work. arch/arm/boot/dts/r8a7791-koelsch.dts | 35 ++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7791-koelsch.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-koelsch.dts +++ renesas/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -289,6 +289,11 @@ renesas,groups = "usb1"; renesas,function = "usb1"; }; + + vin1_pins: vin1 { + renesas,groups = "vin1_data8", "vin1_clk"; + renesas,function = "vin1"; + }; }; ðer { @@ -416,6 +421,19 @@ status = "okay"; clock-frequency = <400000>; + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep>; + }; + }; + }; + eeprom@50 { compatible = "renesas,24c02"; reg = <0x50>; @@ -463,3 +481,20 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; }; + +/* composite video input */ +&vin1 { + status = "ok"; + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html