Re: [PATCH 1/6] dt-bindings: nvmem: add cell-type to nvmem cells

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 22/09/2021 13:31, Ahmad Fatoum wrote:

On 08.09.21 12:02, Joakim Zhang wrote:
From: Srinivas Kandagatla<srinivas.kandagatla@xxxxxxxxxx>

Some of the nvmem providers encode data for certain type of nvmem cell,
example mac-address is stored in ascii or with delimiter or in reverse order.

This is much specific to vendor, so having a cell-type would allow nvmem
provider drivers to post-process this before using it.
I don't agree with this assessment. Users of the OCOTP so far
used this specific encoding. Bootloaders decode the OCOTP this way, but this
encoding isn't really an inherent attribute of the OCOTP. A new NXP SoC
with a different OTP IP will likely use the same format. Users may even
use the same format on an EEPROM to populate a second off-SoC interface, .. etc.

That is okay.
How would you go about using this same format on an EEPROM?

Am guessing that by the time there are more users for such formats, those post-processing functions should be converted into some library functions.

--srini


I'd thus prefer to not make this specific to the OCOTP as all:

    * #define NVMEM_CELL_ENCODING_MAC_ADDRESS_IMX    /* ... */



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux